Top 48 Hp4 Carbons

 

2012 - 2014 BMW S1000RR  HP4 Carbon Fiber Tail Fairing

2012 – 2014 BMW S1000RR / HP4 Carbon Fiber Tail Fairing

2012 – 2014 BMW S1000RR / HP4 Carbon Fiber Tail Fairing - Made of the highest 3k carbon fiber materials. Carbon fiber materials may require slight filing during installation. 2×2 twill weave. Fits bmw s1000rr (12-14) only compatible with 2012+ bmw s1000rr under tail fairing. Installation hardware is not included fairings screws sold separately.

 

2015 - 2017 BMW S1000RR  HP4 Carbon Fiber Mid Side Fairings

2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Mid Side Fairings

2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Mid Side Fairings - Pre-drilled holes and coating are in place to ensure finish consistency. Includes aluminum insert. This carbon fiber mid side fairings are specifically designed for bmw s1000rr (15-17). Made of the highest 3k twill carbon fiber material, the mid side fairings are uv-protected and prevented from yellowing.

 

2009 - 2014 BMW S1000RR  HP4 Carbon Fiber Side Tank Panels

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Side Tank Panels

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Side Tank Panels - Made of the highest 3k carbon fiber material, the side tank panels are uv-protected and prevented from yellowing. Pre-drilled holes and coating are in place to ensure finish consistency. This carbon fiber side tank panels are specifically designed for bmw s1000rr (09-14).

 

Dyno-Boost Adjustable Fuel Controller Performance Chip BMW HP4 Carbon - Authentic Magnum

Dyno-Boost Adjustable Fuel Controller Performance Chip BMW HP4 Carbon – Authentic Magnum

Dyno-Boost Adjustable Fuel Controller Performance Chip BMW HP4 Carbon – Authentic Magnum - Though performance chips are not especially for economy improvement & basically subjected to gain more hp, when modifying air fuel ratio, slightly at the expense of emission & noise level, efficiency of combustion is improved & you save fuel by up to 6%. Magnum parts are made in europe & covered by 10-year warranty. Dyno-boost increases hp by adjusting afr between 12. Set advanced fuel trim, dialing a multi-turn screw. Remap factory engine or calibrate engine management to any performance exhaust, intake, etc. 7 & 14. Chip modifies signals being read by the ecu, resulting adjustment to the afr then again it monitors & overrides the o2 sensor (if any) signal accordingly the chip does not allow ecu to restrict the air/fuel ratio just has been fooled. Preinstalled. Magnum’s experience warrants peak performance, reliability & perfect style. Dyno-boost tricks the ecu thinking the intake air much more cooler, then the ecu will send more fuel for a richer mix besides on o2 sensor models the unique oxygen sensor overriding circuit incorporated blocks restrictions effected by the ecu. Magnumtuning factory dyno-boost is a fully adjustable, motorcycle specific fuel controller designed for all fuel injected bikes controlled by ecu, simply wires inline with the iat (intake air temperature) or maf (mass air flow) sensor & plugs into the oxygen sensor (if any). It allows you to fully adjust the air fuel ratio (afr). 7. Even people who are not technical minded will find, kit is not difficult to install just needs 20 minutes. Injection is controlled in multiple ways. Magnum tuningtm has been dealing with manufacture of upgrades since 1994. Adjustment needs no expertise. Peppy acceleration, 15% extra horsepower & torque, lower quarter mile times & fine throttle response. It will not affect engine reliability & endurance.

 

Cyleto Front Brake Pads for BMW HP2 Sport 2008 2009 2010 2011  HP4 1000cc 2013 2014  HP4 Carbon 2013

Cyleto Front Brake Pads for BMW HP2 Sport 2008 2009 2010 2011 / HP4 1000cc 2013 2014 / HP4 Carbon 2013

Cyleto Front Brake Pads for BMW HP2 Sport 2008 2009 2010 2011 / HP4 1000cc 2013 2014 / HP4 Carbon 2013 - Easy install,perfect fit the vehicles list in title. Adviceif the brake disc wear serious, please replace it before install the brake pads. Position front. Dimension 10225 x 4225 x 75mm (4025 x 1663 x 0295 inch). Provide a safe stopping and the brake pads designed for the brake disk to decrease the wear.

 

2009-2017 BMW S1000R  S1000RR  HP4 CARBON Fiber Fibre Swingarm Cover Guard Protector

2009-2017 BMW S1000R / S1000RR / HP4 CARBON Fiber Fibre Swingarm Cover Guard Protector

2009-2017 BMW S1000R / S1000RR / HP4 CARBON Fiber Fibre Swingarm Cover Guard Protector - Cured using autoclave and finished with a high-gloss clear coat. 2 x 2 plain weave (this is the typical size and weave pattern used on oem). Uv protective coating to prevent bleaching from the sun / flex resin (epoxy resin binding) for easier installation. [Scroll down to see fitment chart] / made of high quality (pre-preg) carbon fiber with fiber glass reinforced backing. This listing is for (1) left side swingarm guard cover (1) right side swingarm guard cover.

 

BMW 2009-2013 S1000RR  HP4 Carbon Fiber Front Fairing Spoiler Winglets

BMW (2009-2013) S1000RR / HP4 Carbon Fiber Front Fairing Spoiler Winglets

BMW (2009-2013) S1000RR / HP4 Carbon Fiber Front Fairing Spoiler Winglets - Made of high quality (pre-peg) carbon fiber with fiber glass backing / this listing is for (1) left side winglet (1) right side winglet. For (2009-2011) models, we supply longer bolts it will reuse the stock nylon washers. Cured using autoclave and finished with a high-gloss clear coat / 2 x 2 plain weave (this is the typical size and weave pattern used on oem). For (2012-2014) models, it will reuse the stock bolts and nylon washers. Uv protective coating to prevent bleaching from the sun / flex resin for easier installation (epoxy resin binding).

 

2009 - 2014 BMW S1000RR  HP4 Carbon Fiber Racing Mid Fairings

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Racing Mid Fairings

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Racing Mid Fairings - Pre-drilled holes and coating are in place to ensure finish consistency. Made of the highest 3k carbon fiber material, the racing mid side fairing is uv-protected and prevented from yellowing. This carbon fiber racing mid side fairing is specifically designed for bmw s1000rr (09-14).

 

BMW 2009-2014 S1000RR HP4 Carbon Fiber Fibre Heel Guard Plate Rearset TYPE 2

BMW (2009-2014) S1000RR/ HP4 Carbon Fiber Fibre Heel Guard Plate Rearset (TYPE 2)

BMW (2009-2014) S1000RR/ HP4 Carbon Fiber Fibre Heel Guard Plate Rearset (TYPE 2) - 2 x 2 plain weave (this is the typical size and weave pattern used on oem). Made of high quality (pre-preg) carbon fiber with fiber glass backing. This listing is for (1) left heel guard (1) right heel guard / [scroll down to see fitment chart]. Uv protective coating to prevent bleaching from the sun / flex resin for easier installation (epoxy resin binding). Cured using autoclave and finished with a high-gloss clear coat.

 

2009 - 2014 BMW S1000RR  HP4 Carbon Fiber Front Fairing - Twill

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Front Fairing – Twill

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Front Fairing – Twill - Made of the highest 3k carbon fiber material, the front fairing is uv-protected and prevented from yellowing. This carbon fiber front fairing is specifically designed for bmw s1000rr (09-14). Pre-drilled holes and coating are in place to ensure finish consistency.

 

2009-2014 BMW S1000RR  HP4 100 Twill Carbon Fiber Left Right Headlight Cowl Cover Fairing Set Same Weave Pattern Gloss Finish As BMW HP HP4 Carbon

(2009-2014) BMW S1000RR / HP4 (100%) Twill Carbon Fiber Left Right Headlight Cowl Cover Fairing Set [Same Weave Pattern & Gloss Finish As BMW HP & HP4 Carbon]

(2009-2014) BMW S1000RR / HP4 (100%) Twill Carbon Fiber Left Right Headlight Cowl Cover Fairing Set [Same Weave Pattern & Gloss Finish As BMW HP & HP4 Carbon] - This listing is for (1 set) left & right headlight cowl cover fairings. Uv protective coating to prevent bleaching from the sun / flex resin for easier installation (epoxy resin binding). 2 x 2 twill weave (same weave and gloss finish as bmw hp4 & hp high performance carbon parts). Cured using autoclave and finished with a high-gloss clear coat. [Scroll down to see fitment chart] / made of 100% high quality (pre-preg) carbon fiber.

 

2009 - 2017 BMW S1000RR  HP4 Carbon Fiber Rear Hugger - Plain

2009 – 2017 BMW S1000RR / HP4 Carbon Fiber Rear Hugger – Plain

2009 – 2017 BMW S1000RR / HP4 Carbon Fiber Rear Hugger – Plain - Pre-drilled holes and coating are in place to ensure finish consistency. Made of the highest 3k carbon fiber material, the rear hugger is uv-protected and prevented from yellowing. This carbon fiber rear hugger is specifically designed for bmw s1000rr (09-17).

 

BMW S1000RR S1000R S1000XR HP4 Carbon Fiber with Kevlar Backing Left Side Engine Case Cover Protector

BMW S1000RR S1000R S1000XR HP4 Carbon Fiber with Kevlar Backing Left Side Engine Case Cover Protector

BMW S1000RR S1000R S1000XR HP4 Carbon Fiber with Kevlar Backing Left Side Engine Case Cover Protector - Cured using autoclave and finished with a high-gloss clear coat. Uv protective coating to prevent bleaching from the sun / flex resin for easier installation (epoxy resin binding). This listing is for (1) left side engine case cover / scroll down to see fitment chart. Made of high quality (pre-preg) carbon fiber with kevlar reinforced backing. 2 x 2 plain weave (this is the typical size and weave pattern used on oem).

 

2015 - 2017 BMW S1000RR  HP4 Carbon Fiber Side Tank Panels

2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Side Tank Panels

2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Side Tank Panels - Includes aluminum insert. This carbon fiber tail side fairings are specifically designed for bmw s1000rr (15-17). Pre-drilled holes and coating are in place to ensure finish consistency. Made of the highest 3k twill carbon fiber material, the tail side fairings are uv-protected and prevented from yellowing.

 

2015 - 2017 BMW S1000RR  HP4 Carbon Fiber Front Fairing

2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Front Fairing

2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Front Fairing - Made of the highest 3k carbon fiber materials. Installation hardware is not included require double-sided tape or adhesive rtv silicone for proper installation. Carbon fiber materials may require slight filing during installation. 2×2 twill weave. Fits bmw s1000rr (15-17).

 

Magnum Magic-Spark Plug Booster Performance Kit BMW HP4 Carbon Ignition Intensifier - Authentic

Magnum Magic-Spark Plug Booster Performance Kit BMW HP4 Carbon Ignition Intensifier – Authentic

Magnum Magic-Spark Plug Booster Performance Kit BMW HP4 Carbon Ignition Intensifier – Authentic - It works with electromagnetic flux evoked by wide spectrum triple-core capsules installed on the ignition leads. Whilst the air fuel mixture is deemed as the material of combustion, the igniter spark is the governor. The microprocessor governed driver unit delivers the capsules’ fluctuating voltage signal, assigned with appropriate cycle and frequency, to max out firing energy in the combustion chamber. This splendid invention, magic-spark plug intensifier, was developed to magnify the spark’s ignition energy which travels through the electrodes, and to improve horsepower, torque, acceleration and fuel economy. Kit includes a red capsule for each of the engine cylinders. If you can effectively minimize the thermal and electronic loss, you can intensify the current flow and gain considerable extra power. Magnum tuning has been dealing with manufacturing upgrades since 1994. Stock ignition systems are popular, but they are grossly underpowered. During the ignition, while current runs through the relatively long ignition leads, from an electrical or mechanical distributor to the spark plug electrodes, multiple losses emerge. The optimum spark plug wire length tends to zero, like on up-to-date coil-on plug ignition systems, where the coil directly sits on the spark plug. Magnum’s experience warrants ultimate performance & reliability. Parts are made in europe & are covered by a 2-year warranty. So what’s the working theory behind all this there are three requirements to make an engine run fuel, air and sparks. It’s a simple arithmetic within a reasonable measure, the higher firing energy an ignition system produces, the more explosive torque can be delivered on the crankshaft. Aggressive electromagnetic flux fluctuation attains this spark enhancement and the end result is palpable, vigorous power coupled with notable fuel consumption drop. Spark plug booster is preset to the specific engine. Does not work with coil-on ignition system.

 

Smart-Tune-X Adjustable Fuel Tuner Performance Chip BMW HP4 Carbon

Smart-Tune-X Adjustable Fuel Tuner Performance Chip BMW HP4 Carbon

Smart-Tune-X Adjustable Fuel Tuner Performance Chip BMW HP4 Carbon - Installation is easy, no special tools or expertise required. Smart-tune-x possesses new unsurpassed features and options. Though fuel controllers basically are designed to gain more performance and not especially to improve the economy, smart-tune-x fuel controller does reduce the fuel consumption in case of normal, everyday riding manner. Magnum tuning has dealt with manufacture of upgrades since 1994. It fouls signals being read by the electronic engine management, resulting an adjustment to the fuel curve, which is what causes the increase in hp, as well as improves acceleration and throttle response throughout the rpm range. Magnum parts are made in europe & covered by 10-year warranty. Unleash the ultimate performance potential of your motorcycle and say adios to sluggish factory programming with the next generation smart-tune-x in less than an hour. Gain 17% additional horsepower, 17% torque combined with explosive acceleration. Magnum’s experience warrants peak performance, reliability & perfect style. With automatic temperature compensation, the volume of fuel delivered is automatically corrected, so that it is equivalent to the amount that would have been delivered at optimum temperature. It is supposed to remap the factory fuel trim restricted hence multiple requirements manufacturers have to comply with nowadays taking off the barriers that they have to imply. Sudden shoot out, much more horsepower, kick out torque and fine throttle response coupled with improved fuel efficiency. It also features the magnificent in-built auto temp compensation system. It is a fully adjustable advanced fuel controller designed to fuel injected bikes. Smart-tune does not affect engine reliability or durability. It simply wires inline with the signal wire of factory intake air temperature sensor which is a standalone probe or the part of the integrated mass air flow (maf, map, tmap) sensor and plugs into the exhaust o2 sensor on emission-controlled motorcycles.

 

2010 2011 2012 2013 2014 BMW S1000RR HP4 Carbon Fiber Twill Under TankSeat Side Panel Fairing Cover Set

2010 2011 2012 2013 2014 BMW S1000RR HP4 Carbon Fiber Twill Under Tank/Seat Side Panel Fairing Cover Set

2010 2011 2012 2013 2014 BMW S1000RR HP4 Carbon Fiber Twill Under Tank/Seat Side Panel Fairing Cover Set - Vacuumed bagged, cured using autoclave, and finished with a high-gloss clear coat. This listing is for (1) left & right under tank side panels. 2 x 2 twill weave (same weave and gloss finish as bmw hp4 & hp high performance carbon parts). Exterior is made of 100% high quality (pre-preg) carbon fiber with fiberglass reinforced backing (frb). Prevent bleaching (yellowing) from the sun / flex resin for easier installation (epoxy resin binding).

 

2015 - 2017 BMW S1000RR  HP4 Carbon Fiber Rear Tail Panel

2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Rear Tail Panel

2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Rear Tail Panel - Made of the highest 3k twill carbon fiber material, the rear tail panel is uv-protected and prevented from yellowing. This carbon fiber rear tail panel is specifically designed for bmw s1000rr (15-17). Pre-drilled holes and coating are in place to ensure finish consistency.

 

2012-2014 BMW S1000RR  HP4 Carbon Fiber Fibre Upper Rear Seat Tail Fairing Cover

(2012-2014) BMW S1000RR / HP4 Carbon Fiber Fibre Upper Rear Seat Tail Fairing Cover

(2012-2014) BMW S1000RR / HP4 Carbon Fiber Fibre Upper Rear Seat Tail Fairing Cover - 2 x 2 plain weave (this is the typical size and weave pattern used on oem). Cured using autoclave and finished with a high-gloss clear coat. Uv protective coating to prevent bleaching from the sun. Made of high quality (pre-peg) carbon fiber with fiber glass backing / flex resin for easier installation (epoxy resin binding). This listing is for (1) upper rear tail fairing.

 

Magnum Magic-Spark Plug Booster Performance Kit BMW HP4 Carbon Ignition Intensifier - Authentic

Magnum Magic-Spark Plug Booster Performance Kit BMW HP4 Carbon Ignition Intensifier – Authentic

Magnum Magic-Spark Plug Booster Performance Kit BMW HP4 Carbon Ignition Intensifier – Authentic - This splendid invention, magic-spark plug intensifier, was developed to magnify the spark’s ignition energy which travels through the electrodes, and to improve horsepower, torque, acceleration and fuel economy. The optimum spark plug wire length tends to zero, like on up-to-date coil-on plug ignition systems, where the coil directly sits on the spark plug. Kit includes a red capsule for each of the engine cylinders. Spark plug booster is preset to the specific engine. The microprocessor governed driver unit delivers the capsules’ fluctuating voltage signal, assigned with appropriate cycle and frequency, to max out firing energy in the combustion chamber. During the ignition, while current runs through the relatively long ignition leads, from an electrical or mechanical distributor to the spark plug electrodes, multiple losses emerge. If you can effectively minimize the thermal and electronic loss, you can intensify the current flow and gain considerable extra power. Does not work with coil-on ignition system. Stock ignition systems are popular, but they are grossly underpowered. It works with electromagnetic flux evoked by wide spectrum triple-core capsules installed on the ignition leads. Parts are made in europe & are covered by a 2-year warranty. So what’s the working theory behind all this there are three requirements to make an engine run fuel, air and sparks. Whilst the air fuel mixture is deemed as the material of combustion, the igniter spark is the governor. Aggressive electromagnetic flux fluctuation attains this spark enhancement and the end result is palpable, vigorous power coupled with notable fuel consumption drop. It’s a simple arithmetic within a reasonable measure, the higher firing energy an ignition system produces, the more explosive torque can be delivered on the crankshaft. Magnum tuning has been dealing with manufacturing upgrades since 1994. Magnum’s experience warrants ultimate performance & reliability.

 

2009 - 2014 BMW S1000RR  HP4 Carbon Fiber Front Tank Cover Vented - Twill

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Front Tank Cover Vented – Twill

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Front Tank Cover Vented – Twill - Made of the highest 3k plain carbon fiber material, the front tank cover is uv-protected and prevented from yellowing. This carbon fiber front tank cover is specifically designed for bmw s1000rr (09-14). Pre-drilled holes and coating are in place to ensure finish consistency.

 

2010 2011 2012 2013 2014 BMW S1000RR HP4 Carbon Fiber Fibre Twill Side Panel Fairing Cover

2010 2011 2012 2013 2014 BMW S1000RR HP4 Carbon Fiber Fibre Twill Side Panel Fairing Cover

2010 2011 2012 2013 2014 BMW S1000RR HP4 Carbon Fiber Fibre Twill Side Panel Fairing Cover - This listing is for (1) left & right upper side panels. Prevent bleaching (yellowing) from the sun / flex resin for easier installation (epoxy resin binding). 2 x 2 twill weave (same weave and gloss finish as bmw hp4 & hp high performance carbon parts). Vacuumed bagged, cured using autoclave, and finished with a high-gloss clear coat. Exterior is made of 100% high quality (pre-preg) carbon fiber with fiberglass reinforced backing (frb).

 

2009 - 2014 BMW S1000RR  HP4 Carbon Fiber Racing Belly Pan - Twill

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Racing Belly Pan – Twill

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Racing Belly Pan – Twill - 3 oem bushing and screws which can be taken out from the oem lower side fairings for proper installation x1 m5-080 x 30mm screws. Installation hardware is not included fairings screws sold separately. Fits bmw s1000rr (09-14). 2×2 twill weave. Require drilling holes additional filing may require if aftermarket exhaust muffler is installed.

 

09 10 11 12 13 14 15 16 17 BMW S1000RR HP4 Carbon Fiber Fibre Heel Guard Plate Rearset

09 10 11 12 13 14 15 16 17 BMW S1000RR HP4 Carbon Fiber Fibre Heel Guard Plate Rearset

09 10 11 12 13 14 15 16 17 BMW S1000RR HP4 Carbon Fiber Fibre Heel Guard Plate Rearset - Manufactured using vacuum bagging and finished with a high-gloss clear coat. Brand new carbon fiber heel guards (this is for a complete set, left & right heel guard). Made from high-quality 3k carbon fiber w/ fiber glass backing with epoxy resin binding.

 

2015 - 2017 BMW S1000RR  HP4 Carbon Fiber Tail Side Fairings

2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Tail Side Fairings

2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Tail Side Fairings - This carbon fiber tail side fairings are specifically designed for bmw s1000rr (15-17). Includes aluminum insert. Made of the highest 3k twill carbon fiber material, the tail side fairings are uv-protected and prevented from yellowing. Pre-drilled holes and coating are in place to ensure finish consistency.

 

2010-2014 Bmw S1000rr HP4 Carbon Fiber Fibre Side Panel Fairing Cover

(2010-2014) Bmw S1000rr HP4 Carbon Fiber Fibre Side Panel Fairing Cover

(2010-2014) Bmw S1000rr HP4 Carbon Fiber Fibre Side Panel Fairing Cover - Brand new carbon fiber upper side panels (you get both left & right panels). Made from high-quality 3k plain weave carbon fiber w/ fiber glass backing with epoxy resin binding. Manufactured using vacuum bagging and finished with a high-gloss clear coat. Due to the large dimension of the product, this item will be shipped with ups ground only please select standard shipping method.

 

2009 - 2014 BMW S1000RR  HP4 Carbon Fiber Heel Plates v76

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Heel Plates v76

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Heel Plates v76 - Made of the highest 3k carbon fiber material, the heel plates are uv-protected and prevented from yellowing. Pre-drilled holes and coating are in place to ensure finish consistency. This carbon fiber heel plates are specifically designed for bmw s1000rr (09-14).

 

2009 - 2017 BMW S1000RR  HP4 Carbon Fiber Rear Hugger

2009 – 2017 BMW S1000RR / HP4 Carbon Fiber Rear Hugger

2009 – 2017 BMW S1000RR / HP4 Carbon Fiber Rear Hugger - This carbon fiber rear hugger is specifically designed for bmw s1000rr (09-17). Pre-drilled holes and coating are in place to ensure finish consistency. Made of the highest 3k carbon fiber material, the rear hugger is uv-protected and prevented from yellowing.

 

2009 - 2014 BMW S1000RR  HP4 Carbon Fiber Mid Side Fairings - Plain

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Mid Side Fairings – Plain

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Mid Side Fairings – Plain - This carbon fiber mid side fairings are specifically designed for bmw s1000rr (09-14). Pre-drilled holes and coating are in place to ensure finish consistency. Made of the highest 3k carbon fiber material, the mid side fairings are uv-protected and prevented from yellowing.

 

2009 - 2014 BMW S1000RR  HP4 Carbon Fiber Front Tank Cover Vented - Plain

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Front Tank Cover Vented – Plain

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Front Tank Cover Vented – Plain - This carbon fiber front tank cover is specifically designed for bmw s1000rr (09-14). Pre-drilled holes and coating are in place to ensure finish consistency. Made of the highest 3k plain carbon fiber material, the front tank cover is uv-protected and prevented from yellowing.

 

2009 - 2014 BMW S1000RR  HP4 Carbon Fiber Lower Windscreen Cover

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Lower Windscreen Cover

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Lower Windscreen Cover - Pre-drilled holes and coating are in place to ensure finish consistency. This carbon fiber lower windscreen cover is specifically designed for bmw s1000rr (09-14). Made of the highest 3k 100% carbon fiber material, the lower windscreen cover is uv-protected and prevented from yellowing.

 

Smart-Tune-X Adjustable Fuel Tuner Performance Chip BMW HP4 Carbon

Smart-Tune-X Adjustable Fuel Tuner Performance Chip BMW HP4 Carbon

Smart-Tune-X Adjustable Fuel Tuner Performance Chip BMW HP4 Carbon - Installation is easy, no special tools or expertise required. It is a fully adjustable advanced fuel controller designed to fuel injected bikes. Magnum parts are made in europe & covered by 10-year warranty. With automatic temperature compensation, the volume of fuel delivered is automatically corrected, so that it is equivalent to the amount that would have been delivered at optimum temperature. It simply wires inline with the signal wire of factory intake air temperature sensor which is a standalone probe or the part of the integrated mass air flow (maf, map, tmap) sensor and plugs into the exhaust o2 sensor on emission-controlled motorcycles. It also features the magnificent in-built auto temp compensation system. Though fuel controllers basically are designed to gain more performance and not especially to improve the economy, smart-tune-x fuel controller does reduce the fuel consumption in case of normal, everyday riding manner. Smart-tune does not affect engine reliability or durability. Gain 17% additional horsepower, 17% torque combined with explosive acceleration. It fouls signals being read by the electronic engine management, resulting an adjustment to the fuel curve, which is what causes the increase in hp, as well as improves acceleration and throttle response throughout the rpm range. It is supposed to remap the factory fuel trim restricted hence multiple requirements manufacturers have to comply with nowadays taking off the barriers that they have to imply. Smart-tune-x possesses new unsurpassed features and options. Magnum’s experience warrants peak performance, reliability & perfect style. Magnum tuning has dealt with manufacture of upgrades since 1994. Unleash the ultimate performance potential of your motorcycle and say adios to sluggish factory programming with the next generation smart-tune-x in less than an hour. Sudden shoot out, much more horsepower, kick out torque and fine throttle response coupled with improved fuel efficiency.

 

EVO-Tech Performance Chip Fuel Controller w REMOTE BMW HP4 Carbon

EVO-Tech Performance Chip Fuel Controller w/ REMOTE BMW HP4 Carbon

EVO-Tech Performance Chip Fuel Controller w/ REMOTE BMW HP4 Carbon - Magnum tuning has been dealing with manufacture of upgrades since 1994. It will not affect engine reliability & endurance. It allows you to fully adjust the air fuel ratio (afr). Evo-tech increases hp by adjusting afr between 12. 7 & 14. Chip modifies signals being read by the ecu, resulting adjustment to the afr then again it monitors & overrides the o2 sensor (if any) signal accordingly the chip does not allow ecu to restrict the air/fuel ratio just has been fooled. Adjustment needs no expertise. Peppy acceleration, 15% extra horsepower & torque, lower quarter mile times & fine throttle response. Though performance chips are not especially for economy improvement & basically subjected to gain more hp, when modifying air fuel ratio, slightly at the expense of emission & noise level, efficiency of combustion is improved & you save fuel by up to 6%. Even people who are not technical minded will find, kit is not difficult to install just needs 60 minutes. Injection is controlled in multiple ways. Evo-tech tricks the ecu thinking the intake air much more cooler, then the ecu will send more fuel for a richer mix besides on o2 sensor models the unique oxygen sensor overriding circuit incorporated blocks restrictions effected by the ecu. Magnum parts are made in europe & covered by 10-year warranty. Preinstalled. Magnum’s experience warrants peak performance, reliability & perfect style. Set advanced fuel trim, dialing a multi-turn screw. Remap factory engine or calibrate engine management to any performance exhaust, intake, etc. 7. Magnumtuning factory evo-tech is a fully adjustable, motorcycle specific fuel controller featuring an in-dash remote, designed for all fuel injected bikes controlled by ecu, simply wires inline with the iat (intake air temperature) or maf (mass air flow) sensor & plugs into the oxygen sensor (if any).

 

2012-2014 BMW S1000RR  HP4 Carbon Fiber Fibre Rear Tail Lower Under Tray Fairing Panel

(2012-2014) BMW S1000RR / HP4 Carbon Fiber Fibre Rear Tail Lower Under Tray Fairing Panel

(2012-2014) BMW S1000RR / HP4 Carbon Fiber Fibre Rear Tail Lower Under Tray Fairing Panel - 2 x 2 plain weave (this is the typical size and weave pattern used on oem). This listing is for (1) rear tail under tray. Made of high quality (pre-peg) carbon fiber with fiber glass backing / flex resin for easier installation (epoxy resin binding). Uv protective coating to prevent bleaching from the sun. Cured using autoclave and finished with a high-gloss clear coat.

 

Cyleto Rear Brake Pads for BMW HP4 2013  HP4 Carbon 2013

Cyleto Rear Brake Pads for BMW HP4 2013 / HP4 Carbon 2013

Cyleto Rear Brake Pads for BMW HP4 2013 / HP4 Carbon 2013 - Adviceif the brake disc wear serious, please replace it before install the brake pads. Easy install,perfect fit the vehicles list in title. Dimension 7813 x 412 x 9mm 3076 x 1622 x 0354 inch. Provide a safe stopping and the brake pads designed for the brake disk to decrease the wear. Position rear.

 

2009 - 2014 BMW S1000RR  HP4 Carbon Fiber Frame Cover

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Frame Cover

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Frame Cover - Made of the highest 3k carbon fiber material, the frame covers are uv-protected and prevented from yellowing. Pre-drilled holes and coating are in place to ensure finish consistency. This carbon fiber frame covers are specifically designed for bmw s1000rr (09-14).

 

2009 - 2014 BMW S1000RR  HP4 Carbon Fiber Sprocket Cover

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Sprocket Cover

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Sprocket Cover - Pre-drilled holes and coating are in place to ensure finish consistency. Made of the highest 3k carbon fiber material, the sprocket cover is uv-protected and prevented from yellowing. This carbon fiber sprocket cover is specifically designed for bmw s1000rr (09-14).

 

2009 - 2014 BMW S1000RR  HP4 Carbon Fiber Windscreen

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Windscreen

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Windscreen - Pre-drilled holes and coating are in place to ensure finish consistency. This carbon fiber windscreen is specifically designed for bmw s1000rr (09-14). Made of the highest 3k 100% carbon fiber material, the windscreen is uv-protected and prevented from yellowing.

 

2015 - 2017 BMW S1000RR  HP4 Carbon Fiber Under Tail Fairing

2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Under Tail Fairing

2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Under Tail Fairing - Pre-drilled holes and coating are in place to ensure finish consistency. Made of the highest 3k twill carbon fiber material, the under tail fairing is uv-protected and prevented from yellowing. Includes aluminum insert. This carbon fiber under tail fairing is specifically designed for bmw s1000rr (15-17).

 

2015 - 2017 BMW S1000RR  HP4 Carbon Fiber Lower Side Fairings

2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Lower Side Fairings

2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Lower Side Fairings - Carbon fiber materials may require slight filing during installation. Fits bmw s1000rr (15-17). Made of the highest 3k carbon fiber materials. 2×2 twill weave. Installation hardware is not included require double-sided tape or adhesive rtv silicone for proper installation.

 

2009 - 2014 BMW S1000RR  HP4 Carbon Fiber Front Tank Cover - Twill

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Front Tank Cover – Twill

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Front Tank Cover – Twill - Made of the highest 3k plain carbon fiber material, the front tank cover is uv-protected and prevented from yellowing. Pre-drilled holes and coating are in place to ensure finish consistency. This carbon fiber front tank cover is specifically designed for bmw s1000rr (09-14).

 

2015 - 2017 BMW S1000RR  HP4 Carbon Fiber Front Tank Cover

2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Front Tank Cover

2015 – 2017 BMW S1000RR / HP4 Carbon Fiber Front Tank Cover - This carbon fiber front tank cover is specifically designed for bmw s1000rr (15-17). Pre-drilled holes and coating are in place to ensure finish consistency. Made of the highest 3k twill carbon fiber material, the front tank cover is uv-protected and prevented from yellowing.

 

CNBK Front Left Brake Pads Semi-met fit for BMW Street Bike HP4 Carbon 13 14 2013 2014 1 Pair2 Pads

CNBK Front Left Brake Pads Semi-met fit for BMW Street Bike HP4 Carbon 13 14 2013 2014 1 Pair(2 Pads)

CNBK Front Left Brake Pads Semi-met fit for BMW Street Bike HP4 Carbon 13 14 2013 2014 1 Pair(2 Pads) - Great feel and modulation for oem replacement. Long lasting and very little rotor wear,gg rated. Good in wet and/or dry conditions. Off-road, touring, enduro, dual sport, performance street pad. Overall a very versatile compound for almost every need.

 

2009 - 2017 BMW S1000RR  HP4 Carbon Fiber Front Fender

2009 – 2017 BMW S1000RR / HP4 Carbon Fiber Front Fender

2009 – 2017 BMW S1000RR / HP4 Carbon Fiber Front Fender - All carbon fiber products from tekarbon are iso 9002 standard factory approved. Pre-drilled holes and coating are in place to ensure finish consistency. This carbon fiber front fender is specifically designed for bmw s1000rr (09-10). Made of the highest 3k carbon fiber material, the front fender is uv-protected and prevented from yellowing.

 

2012 - 2014 BMW S1000RR  HP4 Carbon Fiber Tail Fairing - Plain

2012 – 2014 BMW S1000RR / HP4 Carbon Fiber Tail Fairing – Plain

2012 – 2014 BMW S1000RR / HP4 Carbon Fiber Tail Fairing – Plain - Carbon fiber materials may require slight filing during installation. Made of the highest 3k carbon fiber materials. Fits bmw s1000rr (12-14) only compatible with 2012+ bmw s1000rr under tail fairing. 1×1 plain weave. Installation hardware is not included fairings screws sold separately.

 

BMW S1000 HP4 Carbon 2013-Present - 3M 846 Scotchgard Paint Protection Film Kit

BMW S1000 HP4 Carbon 2013-Present – 3M 846 Scotchgard Paint Protection Film Kit

BMW S1000 HP4 Carbon 2013-Present – 3M 846 Scotchgard Paint Protection Film Kit - You are buying one custom made motorbike paint protection kit made with 3m 846 scotchgard product. Film features a gloss appearance with years of durability against yellowing, cracking, bubbling and peeling clear film is flexible and engineered to conform to. We have over 20,000 templates and images in our software covering cars from 2002-present. All kits made per order after payment we will email to confirm the vehicle this will ensure the proper kit is made.

 

2009 - 2014 BMW S1000RR  HP4 Carbon Fiber Racing Belly Pan - Plain

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Racing Belly Pan – Plain

2009 – 2014 BMW S1000RR / HP4 Carbon Fiber Racing Belly Pan – Plain - Require drilling holes additional filing may require if aftermarket exhaust muffler is installed. Installation hardware is not included fairings screws sold separately. Fits bmw s1000rr (09-14). 1×1 plain weave. 3 oem bushing and screws which can be taken out from the oem lower side fairings for proper installation x1 m5-080 x 30mm screws.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.