Top 45 Husqvarna Cr125s

 

Fork Bushings Kit 38-6068 Husqvarna CR125 2010 2011 2012 2013

Fork Bushings Kit 38-6068 Husqvarna CR125 2010 2011 2012 2013

Fork Bushings Kit 38-6068 Husqvarna CR125 2010 2011 2012 2013 - Cr125. Dyno-tested to 500,000 strokes with less wear than oem. 2010 2011 2012 2013. All balls 38-6068 fork seal and dust seal kit. Husqvarna.

 

1993 Husqvarna CR125 Dirt Bike Upper Chain Roller

1993 Husqvarna CR125 Dirt Bike Upper Chain Roller

1993 Husqvarna CR125 Dirt Bike Upper Chain Roller - Complete with double-sealed roller bearings and all necessary hardware for each installation. Includes one upper chain roller and hardware, see our store for matching lower chain rollers in black, clear, red or blue. Color black. Compatibility 1993 husqvarna cr125. Will last much longer than expensive oe rollers.

 

Fork and Dust Seal Kit 56-149 Husqvarna CR125 1998 1999 2000 2001 2002 2003 2004

Fork and Dust Seal Kit 56-149 Husqvarna CR125 1998 1999 2000 2001 2002 2003 2004

Fork and Dust Seal Kit 56-149 Husqvarna CR125 1998 1999 2000 2001 2002 2003 2004 - All balls 56-149 fork seal and dust seal kit. Husqvarna. Cr125. 1998 1999 2000 2001 2002 2003 2004. Patented fork seal features a balanced 3 lip design that evenly distributes the pressure reducing operating temperature, wear and friction custom elastomer fork seals have been tested to outlast oem fork seals extends typical seal life by 3 to 5 times over oem seals.

 

Husqvarna CR125 95-04 Front Performance Brake Pads by Niche Cycle Supply

Husqvarna CR125 95-04 Front Performance Brake Pads by Niche Cycle Supply

Husqvarna CR125 95-04 Front Performance Brake Pads by Niche Cycle Supply -  Very high quality.  sold in single rotor sets are shown. High performance metallic brake pads. Feature a friction rating of hh, the highest in the industry last twice as long as organic pads and provide maximum brake effect.  Intended for use where initial bite, and optimum braking performance is required.

 

Clutch Cable 45-2121 Husqvarna CR125 2000 2001 2002 2003 2004 2005 2006

Clutch Cable 45-2121 Husqvarna CR125 2000 2001 2002 2003 2004 2005 2006

Clutch Cable 45-2121 Husqvarna CR125 2000 2001 2002 2003 2004 2005 2006 - Clutch cable. Clutch cable assemblies feature a uv resistant black pvc outer jacket for maximum flexibility and durabilitypre-stretched inner wire is flared out before the terminal end is cast for superior pull out resistanceepdm molded components are manufactured from high strength pom materialmeets or exceeds oem standards.

 

2012 Husqvarna CR125 CR 125 2 Stroke Custom Carburetor Carb Stage 1-3 Jet Kit

2012 Husqvarna CR125 CR 125 2 Stroke Custom Carburetor Carb Stage 1-3 Jet Kit

2012 Husqvarna CR125 CR 125 2 Stroke Custom Carburetor Carb Stage 1-3 Jet Kit - Kit includes main jets, needle adjusters, nylon spacers, drill bits, slide hole mod (with cv carb), idle mixture mod, slide spring mod (with cv carb), carb schematic, specifications, carb sync tool build, carb cleaning procedure, proper tuning techniques, and step by step instructions with photos. The kit comes with complete instructions for installation it is easy, and we offer full support, instructions, and a complete carb schematic only basic hand tools are required. Each jet kit is custom made to your specifications for optimum performance, when you order, please email us at 6sigmajetkits@gmailcom , with your exact year, model, modifications made, & elevation, so we can design, build, & ship your kit. Increased performance at all rpm’s, faster throttle response, & stops lean exhaust popping that damages engines. We give a 100% satisfaction guarantee upon installation, if you are not happy with the results, we will give you a full refund.

 

MSR Fork Bushing with Oil Dust Seals Kit for Husqvarna CR125 2010-2013

MSR Fork Bushing with Oil & Dust Seals Kit for Husqvarna CR125 2010-2013

MSR Fork Bushing with Oil & Dust Seals Kit for Husqvarna CR125 2010-2013 - Msr fork oil seal & dust seal kitdyno tested to last 3 to 4 times longer than oem seals. Includes 2 slider bushing and 2 leg bushings along with all copper washers, o-rings and fork seal snap rings. Msr fork bushing with oil & dust seals kit for husqvarna cr125 2010-2013kit includes 1 msr fork bushing kit, 1 msr fork oil seal & dust seal kitmsr fork bushing kitbushing dyno-tested to 500,000 strokes with less wear than oem bushing. Complete bushing kits for all popular off-road/mx bikes.

 

ProTrax Complete Rear Wheel Rim 18X 215 Black Hub HUSQVARNA CR125 TE125 WR125

ProTrax Complete Rear Wheel Rim 18″X 2.15 Black Hub HUSQVARNA CR125 TE125 WR125

ProTrax Complete Rear Wheel Rim 18″X 2.15 Black Hub HUSQVARNA CR125 TE125 WR125 - Burly t302h stainless steel spokes are polished (not acid wash) for maximum tensile strength (>1,400 mpa) and a lasting finish. The protrax pre-assembled complete wheel is assembled with craftsmanship, made from the highest quality materials making the protrax wheel the strongest and lightest wheel on the market. Hubs are forged and then machined from 6061-t6 aluminum. Hubs are stronger than stock cast or other competitor billet hubs. 3 cross spoke lacing pattern provides a stronger wheel than other competitor’s or oem 2 cross spoke lacing pattern. One-piece hubs are designed to match perfectly with stock or aftermarket sprockets and rotors no need to buy carriers. Fitments include husqvarna cr125 2014, 2016 tc125 2014, 2017 te125 2014, 2016 wr125 2014, 2016 fe250 2014, 2017 tc250 2014, 2017 te250 2014, 2017 txc250 2014, 2014 wr250 2014, 2014 fc350 2014, 2017 fe350 2014, 2017 fe350 2015, 2016 fe450 2014, 2017 fe501 2015, 2016 fc501 2014, 2015 fe501 2014, 2017. Billet 7075-t7351 aluminum nipples with high precision thread treatment keep spokes tight. Rims are made from aircraft-quality aluminum 7050-t7351 material, processed with a three-stage heat treatment for highest tensile strength (550-560 mpa).

 

NOK front fork Oil Seal Pair Husqvarna CR125 2010-2013

NOK front fork Oil Seal Pair Husqvarna CR125 2010-2013

NOK front fork Oil Seal Pair Husqvarna CR125 2010-2013 - Original nok guaranteed oil seal set made in japan. Oil seal size is 48x581x85/105. A pair of oil seals that fit the husqvarna cr125 2010-2013. Weather resistant, durable and trusted for performance. Made from the highest quality materials trusted by manufacturers worldwide.

 

Cyleto Front and Rear Brake Pads for HUSQVARNA CR125 CR 125  CR250 CR 250 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004

Cyleto Front and Rear Brake Pads for HUSQVARNA CR125 CR 125 / CR250 CR 250 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004

Cyleto Front and Rear Brake Pads for HUSQVARNA CR125 CR 125 / CR250 CR 250 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 - Dimension f94 x 373 x 75m (3701 x 1468 x 0295 inch) r7813 x 412 x 9mm (3076 x 1622 x 0354 inch). Position front and rear. Provide a safe stopping and the brake pads designed for the brake disk to decrease the wear. Easy install,perfect fit the vehicles list in title. Adviceif the brake disc wear serious, please replace it before install the brake pads.

 

Husqvarna CR125 05-13 Rear Sintered Brake Pads by Niche Cycle Supply

Husqvarna CR125 05-13 Rear Sintered Brake Pads by Niche Cycle Supply

Husqvarna CR125 05-13 Rear Sintered Brake Pads by Niche Cycle Supply - Wrist pin bearings are manufactured from scm415 chromoly steel. The overall bearing structure and high rigidity allows them to withstand the significant stress levels created by varying/high rpm’s and the impact of an engine’s stroke. Top-end wrist pin bearings are the main components in transmitting the engine’s explosive force from the crown of the piston to the rotating assembly.

 

Motion Pro Throttle Cable Black Vinyl Husqvarna CR125 WR125 WR250 2000-2008

Motion Pro Throttle Cable Black Vinyl Husqvarna CR125 WR125 WR250 2000-2008

Motion Pro Throttle Cable Black Vinyl Husqvarna CR125 WR125 WR250 2000-2008 - Uses precise oem component dimensionsmanufactured to meet or exceed oem specificationspart number embossed on each cablecolor coded header card indicates brand of machine part number listed on each packagespecial nylon inner liner assures smooth operationextra outer sleeve to protect cabletype standardfits the following husqvarna modelscr125 2000-2006wr125 2000-2001, 2004-2008wr250 2000-2002, 2004-2007please note the image displayed is representative of the item, but may vary depending on your specific model.

 

Husqvarna CR125 05-13 Front Performance Brake Pads by Niche Cycle Supply

Husqvarna CR125 05-13 Front Performance Brake Pads by Niche Cycle Supply

Husqvarna CR125 05-13 Front Performance Brake Pads by Niche Cycle Supply -  Sold in single rotor sets are shown.  Very high quality. Feature a friction rating of hh, the highest in the industry last twice as long as organic pads and provide maximum brake effect. High performance metallic brake pads.  Intended for use where initial bite, and optimum braking performance is required.

 

2001-03 Husqvarna CR125 CR 125 2 Stroke Custom Carburetor Carb Stage 1-3 Jet Kit

2001-03 Husqvarna CR125 CR 125 2 Stroke Custom Carburetor Carb Stage 1-3 Jet Kit

2001-03 Husqvarna CR125 CR 125 2 Stroke Custom Carburetor Carb Stage 1-3 Jet Kit - Increased performance at all rpm’s, faster throttle response, & stops lean exhaust popping that damages engines. The kit comes with complete instructions for installation it is easy, and we offer full support, instructions, and a complete carb schematic only basic hand tools are required. We give a 100% satisfaction guarantee upon installation, if you are not happy with the results, we will give you a full refund. Each jet kit is custom made to your specifications for optimum performance, when you order, please email us at 6sigmajetkits@gmailcom , with your exact year, model, modifications made, & elevation, so we can design, build, & ship your kit. Kit includes main jets, needle adjusters, nylon spacers, drill bits, slide hole mod (with cv carb), idle mixture mod, slide spring mod (with cv carb), carb schematic, specifications, carb sync tool build, carb cleaning procedure, proper tuning techniques, and step by step instructions with photos.

 

EBC Sport Carbon X Rear Brake Pad Husqvarna CR125 2006 - 2010

EBC Sport Carbon “X” Rear Brake Pad Husqvarna CR125 2006 – 2010

EBC Sport Carbon “X” Rear Brake Pad Husqvarna CR125 2006 – 2010 - Aramid fibre composite / carbon compound for all around performance. Lowest heat generation. Best for fast dry riding, not for mud, wet or sand. The us #1 selling aftermarket line of premium quality organic disc brake pads the ebc line covers every make and model on the market, and reflecting oem ideology, uses a front and rear universal friction material blend that does not require 2 separate part numbers.

 

NOK front fork Wiper Dust Seal Pair Husqvarna CR125 2010-2013

NOK front fork Wiper Dust Seal Pair Husqvarna CR125 2010-2013

NOK front fork Wiper Dust Seal Pair Husqvarna CR125 2010-2013 - Dust seal size is 48x585x6/115. Weather resistant, durable and trusted for performance. A pair of dust seals that fit the husqvarna cr125 2010-2013. Made from the highest quality materials trusted by manufacturers worldwide. Original nok guaranteed wiper dust seal set made in japan.

 

CHAIN ROLLER HUSQVARNA CR125 CR250 SM125 SM400R SM450R SM510R SM530R SM610

CHAIN ROLLER HUSQVARNA CR125 CR250 SM125 SM400R SM450R SM510R SM530R SM610

CHAIN ROLLER HUSQVARNA CR125 CR250 SM125 SM400R SM450R SM510R SM530R SM610 - Chain roller husqvarna cr125 cr250 sm125 sm400r sm450r sm510r sm530r sm610.

 

Outlaw Racing OR4661 Throttle Cable HUSQVARNA CR125 WR250 XC400 WR430 XC500

Outlaw Racing OR4661 Throttle Cable HUSQVARNA CR125 WR250 XC400 WR430 XC500

Outlaw Racing OR4661 Throttle Cable HUSQVARNA CR125 WR250 XC400 WR430 XC500 - Outlaw racing replacement throttle cables offer oem performance at a fraction of the price. Standard black vinyl coil-wound housing with lining provides a smooth, low friction pull. Meets or exceeds oem quality. Lubricate before use. Stainless steel inner wire for high strength and corrosion free performance.

 

Steering Stem Head Bearings and Seals Kit Husqvarna CR125 1998

Steering Stem Head Bearings and Seals Kit Husqvarna CR125 1998

Steering Stem Head Bearings and Seals Kit Husqvarna CR125 1998 - Kit contains 2 tapered bearing and 2 seals. All seals are double lip and rubber encapsulated with internal stainless garter spring for maximum sealing performance. All bearings feature low-drag double lip rubber seals on both sides. Double sealed bearings outperform metal shielded bearings because they keep out dirt and water.

 

FRONT WHEEL BEARING KIT HUSQVARNA CR125 CR250 CR 125 250 2001 2002 2003 2004 05

FRONT WHEEL BEARING KIT HUSQVARNA CR125 CR250 CR 125 250 2001 2002 2003 2004 05

FRONT WHEEL BEARING KIT HUSQVARNA CR125 CR250 CR 125 250 2001 2002 2003 2004 05 - Front wheel bearing kit husqvarna cr125 cr250 cr 125 250 2001 2002 2003 2004 05.

 

NOK dust wiper and oil seal Husqvarna CR125 2010-2013

NOK dust wiper and oil seal Husqvarna CR125 2010-2013

NOK dust wiper and oil seal Husqvarna CR125 2010-2013 - Weather resistant, durable and trusted for performance. Oil seal size is 48x585x6/115 & dust seal size is 48mm. Made from the highest quality materials trusted by manufacturers worldwide. Original nok guaranteed fork oil seal and wiper dust seal set made in japan. A pair of dust seals and a pair of oil seals that fit the husqvarna cr125 2010-2013.

 

Husqvarna CR125 95-04 Rear Performance Brake Pads by Niche Cycle Supply

Husqvarna CR125 95-04 Rear Performance Brake Pads by Niche Cycle Supply

Husqvarna CR125 95-04 Rear Performance Brake Pads by Niche Cycle Supply -  Sold in single rotor sets are shown.  Very high quality. Feature a friction rating of hh, the highest in the industry last twice as long as organic pads and provide maximum brake effect.  Intended for use where initial bite, and optimum braking performance is required. High performance metallic brake pads.

 

Outlaw Racing OR4664 Throttle Cable HUSQVARNA CR125 WR125 2008 WR250 WR300 09-12

Outlaw Racing OR4664 Throttle Cable HUSQVARNA CR125 WR125 2008 WR250 WR300 09-12

Outlaw Racing OR4664 Throttle Cable HUSQVARNA CR125 WR125 2008 WR250 WR300 09-12 - Standard black vinyl coil-wound housing with lining provides a smooth, low friction pull. Stainless steel inner wire for high strength and corrosion free performance. Outlaw racing replacement throttle cables offer oem performance at a fraction of the price. Oem 8000b0520 meets or exceeds oem quality. Lubricate before use.

 

Cyleto Rear Brake Pads for HUSQVARNA CR125 CR 125 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004

Cyleto Rear Brake Pads for HUSQVARNA CR125 CR 125 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004

Cyleto Rear Brake Pads for HUSQVARNA CR125 CR 125 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 - Easy install,perfect fit the vehicles list in title. Dimension 7813 x 412 x 9mm 3076 x 1622 x 0354 inch. Adviceif the brake disc wear serious, please replace it before install the brake pads. Provide a safe stopping and the brake pads designed for the brake disk to decrease the wear. Position rear.

 

Fork and Dust Seal Kit 56-149 Husqvarna CR125 2005 2006 2007 2008

Fork and Dust Seal Kit 56-149 Husqvarna CR125 2005 2006 2007 2008

Fork and Dust Seal Kit 56-149 Husqvarna CR125 2005 2006 2007 2008 - All balls 56-149 fork seal and dust seal kit. Patented fork seal features a balanced 3 lip design that evenly distributes the pressure reducing operating temperature, wear and friction custom elastomer fork seals have been tested to outlast oem fork seals extends typical seal life by 3 to 5 times over oem seals. Husqvarna. Cr125. 2005 2006 2007 2008.

 

Outlaw Racing OR09B0011 Wrist Pin Bearing 15 X 19 X 167 HUSQVARNA CR125 1997-14 Sm 125 98-14

Outlaw Racing OR09B0011 Wrist Pin Bearing 15 X 19 X 16.7 HUSQVARNA CR125 1997-14 Sm 125 98-14

Outlaw Racing OR09B0011 Wrist Pin Bearing 15 X 19 X 16.7 HUSQVARNA CR125 1997-14 Sm 125 98-14 - The overall bearing structure and high rigidity allows them to withstand the significant stress levels created by varying/high rpm’s and the impact of an engine’s stroke. Top-end wrist pin bearings are the main components in transmitting the engine’s explosive force from the crown of the piston to the rotating assembly. Wrist pin bearings are manufactured from scm415 chromoly steel and treated using a process called carbonnitriding this enhances the fatigue strength and heat dissipating capacity of the cage.

 

Fork Seal and Dust Seal Kit 56-145 Husqvarna CR125 2009

Fork Seal and Dust Seal Kit 56-145 Husqvarna CR125 2009

Fork Seal and Dust Seal Kit 56-145 Husqvarna CR125 2009 - All balls 56-145 fork seal and dust seal kit. Husqvarna. Patented fork seal features a balanced 3 lip design that evenly distributes the pressure reducing operating temperature, wear and friction custom elastomer fork seals have been tested to outlast oem fork seals extends typical seal life by 3 to 5 times over oem seals. Cr125. 2009.

 

ProTrax Complete Rear Wheel Rim 19X 215 Black Hub HUSQVARNA CR125 TE125

ProTrax Complete Rear Wheel Rim 19″X 2.15 Black Hub HUSQVARNA CR125 TE125

ProTrax Complete Rear Wheel Rim 19″X 2.15 Black Hub HUSQVARNA CR125 TE125 - 3 cross spoke lacing pattern provides a stronger wheel than other competitor’s or oem 2 cross spoke lacing pattern. Fitments include husqvarna cr125 2014, 2016 tc125 2014, 2017 te125 2014, 2016 wr125 2014, 2016 fe250 2014, 2017 tc250 2014, 2017 te250 2014, 2017 txc250 2014, 2014 wr250 2014, 2014 fc350 2014, 2017 fe350 2014, 2017 fe350 2015, 2016 fe450 2014, 2017 fe501 2015, 2016 fc501 2014, 2015 fe501 2014, 2017. Burly t302h stainless steel spokes are polished (not acid wash) for maximum tensile strength (>1,400 mpa) and a lasting finish. The protrax pre-assembled complete wheel is assembled with craftsmanship, made from the highest quality materials making the protrax wheel the strongest and lightest wheel on the market. Pre-assembled wheel includes rim, rim strip, spokes & nipples, hub, bearings, seals, spacers, rotor bolts, sprocket bolts and protrax spoke wrench. Rims are made from aircraft-quality aluminum 7050-t7351 material, processed with a three-stage heat treatment for highest tensile strength (550-560 mpa). Hubs are stronger than stock cast or other competitor billet hubs. Billet 7075-t7351 aluminum nipples with high precision thread treatment keep spokes tight. Hubs are forged and then machined from 6061-t6 aluminum. One-piece hubs are designed to match perfectly with stock or aftermarket sprockets and rotors no need to buy carriers.

 

Husqvarna CR125 05-13 Rear Performance Brake Pads by Niche Cycle Supply

Husqvarna CR125 05-13 Rear Performance Brake Pads by Niche Cycle Supply

Husqvarna CR125 05-13 Rear Performance Brake Pads by Niche Cycle Supply - Top-end wrist pin bearings are the main components in transmitting the engine’s explosive force from the crown of the piston to the rotating assembly. Wrist pin bearings are manufactured from scm415 chromoly steel. The overall bearing structure and high rigidity allows them to withstand the significant stress levels created by varying/high rpm’s and the impact of an engine’s stroke.

 

Fork and Dust Seal Kit 56-147 Husqvarna CR125 2010 2011 2012 2013

Fork and Dust Seal Kit 56-147 Husqvarna CR125 2010 2011 2012 2013

Fork and Dust Seal Kit 56-147 Husqvarna CR125 2010 2011 2012 2013 - 2010 2011 2012 2013. Cr125. Husqvarna. All balls 56-147 fork seal and dust seal kit. Patented fork seal features a balanced 3 lip design that evenly distributes the pressure reducing operating temperature, wear and friction custom elastomer fork seals have been tested to outlast oem fork seals extends typical seal life by 3 to 5 times over oem seals.

 

Magnum Magic-Spark Plug Booster Performance Kit Husqvarna CR125 Ignition Intensifier - Authentic

Magnum Magic-Spark Plug Booster Performance Kit Husqvarna CR125 Ignition Intensifier – Authentic

Magnum Magic-Spark Plug Booster Performance Kit Husqvarna CR125 Ignition Intensifier – Authentic - Aggressive electromagnetic flux fluctuation attains this spark enhancement and the end result is palpable, vigorous power coupled with notable fuel consumption drop. Magnum’s experience warrants ultimate performance & reliability. It’s a simple arithmetic within a reasonable measure, the higher firing energy an ignition system produces, the more explosive torque can be delivered on the crankshaft. It works with electromagnetic flux evoked by wide spectrum triple-core capsules installed on the ignition leads. Kit includes a red capsule for each of the engine cylinders. This splendid invention, magic-spark plug intensifier, was developed to magnify the spark’s ignition energy which travels through the electrodes, and to improve horsepower, torque, acceleration and fuel economy. Stock ignition systems are popular, but they are grossly underpowered. Whilst the air fuel mixture is deemed as the material of combustion, the igniter spark is the governor. If you can effectively minimize the thermal and electronic loss, you can intensify the current flow and gain considerable extra power. The optimum spark plug wire length tends to zero, like on up-to-date coil-on plug ignition systems, where the coil directly sits on the spark plug. Spark plug booster is preset to the specific engine. Magnum tuning has been dealing with manufacturing upgrades since 1994. Parts are made in europe & are covered by a 2-year warranty. The microprocessor governed driver unit delivers the capsules’ fluctuating voltage signal, assigned with appropriate cycle and frequency, to max out firing energy in the combustion chamber. So what’s the working theory behind all this there are three requirements to make an engine run fuel, air and sparks. During the ignition, while current runs through the relatively long ignition leads, from an electrical or mechanical distributor to the spark plug electrodes, multiple losses emerge. Does not work with coil-on ignition system.

 

Husqvarna CR125 CR 125 2 Stroke 6 Sigma Custom Carburetor Carb Stage 1-7 Jet Kit

Husqvarna CR125 CR 125 2 Stroke 6 Sigma Custom Carburetor Carb Stage 1-7 Jet Kit

Husqvarna CR125 CR 125 2 Stroke 6 Sigma Custom Carburetor Carb Stage 1-7 Jet Kit - Increased performance at all rpm’s, faster throttle response, & stops lean exhaust popping that damages engines. The kit comes with complete instructions for installation it is easy, and we offer full support, instructions, and a complete carb schematic only basic hand tools are required. Kit includes main jets, needle adjusters, nylon spacers, drill bits, slide hole mod (with cv carb), idle mixture mod, slide spring mod (with cv carb), carb schematic, specifications, carb sync tool build, carb cleaning procedure, proper tuning techniques, and step by step instructions with photos. Each jet kit is custom made to your specifications for optimum performance, when you order, please email us first through amazon with your exact year, model, modifications made, & elevation, so we can design, build, & ship your kit. We give a 100% satisfaction guarantee upon installation, if you are not happy with the results, we will give you a full refund.

 

Cyleto Rear Brake Pads for Husqvarna CR125 CR 125 2005-2013  SMS 4 125 2011  WR125 WR 125 2006 2007 2008 2009 2010 2011 2012 2013

Cyleto Rear Brake Pads for Husqvarna CR125 CR 125 2005-2013 / SMS 4 125 2011 / WR125 WR 125 2006 2007 2008 2009 2010 2011 2012 2013

Cyleto Rear Brake Pads for Husqvarna CR125 CR 125 2005-2013 / SMS 4 125 2011 / WR125 WR 125 2006 2007 2008 2009 2010 2011 2012 2013 - Adviceif the brake disc wear serious, please replace it before install the brake pads. Easy install,perfect fit the vehicles list in title. Position rear. Provide a safe stopping and the brake pads designed for the brake disk to decrease the wear. Dimensiona64 x 416 x 925mm(2520 x 1638 x 0364 inch)b64 x 416 x 925mm(2520 x 1638 x 0364 inch).

 

Husqvarna CR125 05-13 Front Sintered Brake Pads by Niche Cycle Supply

Husqvarna CR125 05-13 Front Sintered Brake Pads by Niche Cycle Supply

Husqvarna CR125 05-13 Front Sintered Brake Pads by Niche Cycle Supply - The overall bearing structure and high rigidity allows them to withstand the significant stress levels created by varying/high rpm’s and the impact of an engine’s stroke. Top-end wrist pin bearings are the main components in transmitting the engine’s explosive force from the crown of the piston to the rotating assembly. Wrist pin bearings are manufactured from scm415 chromoly steel.

 

Outlaw Racing Piston Kit Standard- 5394mm Gas Gas Enducross EC 125 2000-2011 Honda CR125R 2004-2007 HUSQVARNA CR125 WR125 1997-2014 SM125 1998-2014 WRE125 1998-2010 Yamaha YZ125 1997-2001

Outlaw Racing Piston Kit Standard- 53.94mm Gas Gas Enducross EC 125 2000-2011 Honda CR125R 2004-2007 HUSQVARNA CR125 WR125 1997-2014 SM125 1998-2014 WRE125 1998-2010 Yamaha YZ125 1997-2001

Outlaw Racing Piston Kit Standard- 53.94mm Gas Gas Enducross EC 125 2000-2011 Honda CR125R 2004-2007 HUSQVARNA CR125 WR125 1997-2014 SM125 1998-2014 WRE125 1998-2010 Yamaha YZ125 1997-2001 - Using low-expansion, low-friction piston alloy resulting in an extended life span of the piston. Please note some product images may be a stock photo and the item you receive may be a different configuration than what is pictured, but we guarantee item will fit listed vehicles. Please contact us for any fitment questions. Machined smooth heads helps to reflect combustion heat and reduces carbon buildup, protecting the top of the piston resulting in increased horsepower and fuel economy by up to 6%. Benefits include increased heat transfer, reduced friction, and help’s to eliminate cold seizures. Outlaw racing piston kits are precision machined to japanese oem specifications. Our teflon coated skirts uses a rolled-on application process which provides a bond that is 10 times stronger than other spray on coatings. Outlaw offers direct replacements for the original equipment as well as hi-compression and a variety of oversize’s to meet your ride’s needs. Kit includes piston, rings, and circlips.

 

New Lever Connection- Shift Lever Husqvarna Cr125 00-13 Wr125 00-13 H543451

New Lever Connection- Shift Lever, Husqvarna Cr125 00-13 Wr125 00-13, H543451

New Lever Connection- Shift Lever, Husqvarna Cr125 00-13 Wr125 00-13, H543451 - Manufactured using high-quality materials and processes. Fitment verified by our engineers who ride. Designed to meet or exceed oem specifications. Designed in the usa produced by top-level manufacturers.

 

Outlaw Racing Piston Gasket Top End Rebuild Kit 5394MM HUSQVARNA CR125 1997-2014

Outlaw Racing Piston Gasket Top End Rebuild Kit 53.94MM HUSQVARNA CR125 1997-2014

Outlaw Racing Piston Gasket Top End Rebuild Kit 53.94MM HUSQVARNA CR125 1997-2014 - Our teflon coated skirts uses a rolled-on application process which provides a bond that is 10 times stronger than other spray on coatings. Piston kits are precision machined to japanese oem specifications, using low-expansion, low-friction piston alloy resulting in an extend life span of the piston. Gaskets use materials such as stainless steel, fluoroviton and teflon outlaw racing gaskets are made to exact oem specs but with better materials to last longer and keep your bike running stronger. The kits are complete with pistons, rings, wrist pin bearings (where applicable) and all gaskets and o-rings needed to complete a top end rebuild. Outlaw racing piston kits with gaskets include everything you need to restore the top end of your bike to factory fresh specs.

 

Husqvarna CR125 95-04 Rear Sintered Brake Pads by Niche Cycle Supply

Husqvarna CR125 95-04 Rear Sintered Brake Pads by Niche Cycle Supply

Husqvarna CR125 95-04 Rear Sintered Brake Pads by Niche Cycle Supply -  These are sold in sets for one rotor.  One set will cover one rotor.  Produces lower wear to the brake rotors compared to full metal pads. Good performance long rotor and pad life low dust low noise. High quality sintered compound brake pad set.

 

Cyleto Rear Brake Pads for HUSQVARNA CR125  CR250  CR360 1992 1993 1994

Cyleto Rear Brake Pads for HUSQVARNA CR125 / CR250 / CR360 1992 1993 1994

Cyleto Rear Brake Pads for HUSQVARNA CR125 / CR250 / CR360 1992 1993 1994 - Adviceif the brake disc wear serious, please replace it before install the brake pads. Provide a safe stopping and the brake pads designed for the brake disk to decrease the wear. Position rear. Easy install,perfect fit the vehicles list in title. Dimension 46 x 45 x 75mm / 1811 x1771 x 0295 inch.

 

Outlaw Racing OR4306 Clutch Cable OR4306 Husqvarna CR125 2000-2007 WR125 2000-2007

Outlaw Racing OR4306 Clutch Cable OR4306 Husqvarna CR125 2000-2007 WR125 2000-2007

Outlaw Racing OR4306 Clutch Cable OR4306 Husqvarna CR125 2000-2007 WR125 2000-2007 - Outlaw racing replacement clutch cables offer oem performance at a fraction of the price standard black vinyl coil-wound housing with lining provides a smooth, low friction pull.   Meets or exceeds oem quality.   Stainless steel inner wire for high strength and corrosion free performance.   Lubricate before use.

 

Clutch Cable 45-2121 Husqvarna CR125 2007 2008 2009 2010 2011 2012

Clutch Cable 45-2121 Husqvarna CR125 2007 2008 2009 2010 2011 2012

Clutch Cable 45-2121 Husqvarna CR125 2007 2008 2009 2010 2011 2012 - Clutch cable assemblies feature a uv resistant black pvc outer jacket for maximum flexibility and durabilitypre-stretched inner wire is flared out before the terminal end is cast for superior pull out resistanceepdm molded components are manufactured from high strength pom materialmeets or exceeds oem standards. Clutch cable.

 

AHL Front Brake Pads FA135 for Husqvarna CR125  CR250  WR250 1992-1994 Sintered copper-based

AHL Front Brake Pads FA135 for Husqvarna CR125 / CR250 / WR250 1992-1994 (Sintered copper-based)

AHL Front Brake Pads FA135 for Husqvarna CR125 / CR250 / WR250 1992-1994 (Sintered copper-based) - High temperature resistant and pollution free. Sizea967x427x74mm b77x422x74mmsintered copper based brake pad produced by oem. Quality assuranceif you are not satisfied with our products,we accept all of the return,replacement or refund requests. Professional manufacturer,designed for exceptional stopping power and long usable life. Delivers unrivalled pedal feel,safe and comfortable.

 

Throttle Cable 45-1055 Husqvarna CR125 2000 2001 2002 2004 2006 2007 2008

Throttle Cable 45-1055 Husqvarna CR125 2000 2001 2002 2004 2006 2007 2008

Throttle Cable 45-1055 Husqvarna CR125 2000 2001 2002 2004 2006 2007 2008 - Throttle cable. Throttle cable assemblies feature a uv resistant black pvc outer jacket for maximum flexibility and durabilitypre-stretched inner wire is flared out before the terminal end is cast for superior pull out resistanceepdm molded components are manufactured from high strength pom materialmeets or exceeds oem standards.

 

Husqvarna CR125 95-04 Front Sintered Brake Pads by Niche Cycle Supply

Husqvarna CR125 95-04 Front Sintered Brake Pads by Niche Cycle Supply

Husqvarna CR125 95-04 Front Sintered Brake Pads by Niche Cycle Supply -  One set will cover one rotor.  Produces lower wear to the brake rotors compared to full metal pads. Good performance long rotor and pad life low dust low noise.  These are sold in sets for one rotor. High quality sintered compound brake pad set.

 

1989-1996 Husqvarna CR125 Dirt Bike Fork Seals

1989-1996 Husqvarna CR125 Dirt Bike Fork Seals

1989-1996 Husqvarna CR125 Dirt Bike Fork Seals - Seal inner diameter size (mm) 45 x 57 x 11. Includes a pair (2) of fork seals. High quality fork seals formed to original equipment (oe) specifications. Made in japan. Compatibility 1989-1996 husqvarna cr125.