Top 18 for Best Harley Davidson Radio in 2017

 

Hill County Customs 1 14 Chrome 14 Ape Hangers Kit for 1996-2006 Harley-Davidson Ultra Classic WRadio CB Cruise - CP-HC-BB14C-UC06-RCCB

Hill County Customs 1 1/4″ Chrome 14″ Ape Hangers Kit for 1996-2006 Harley-Davidson Ultra Classic W/Radio CB & Cruise – CP-HC-BB14C-UC06-RCCB

Hill County Customs 1 1/4″ Chrome 14″ Ape Hangers Kit for 1996-2006 Harley-Davidson Ultra Classic W/Radio CB & Cruise – CP-HC-BB14C-UC06-RCCB - Please read the description in it’s entirety and send us an email with your harley’s year, exact model # and tell us if you have fuel injection, cruise control, hydraulic clutch or abs brakes while installing these bars, we recommend replacing the riser bushings, part # hc-hbb102 and installing the 1 piece top clamp 55918-08 installation kits are also available 1996-1998 model part # hc-hik-01b, 1999-2004 model part # hc-hik-02b, 2005-2006 model part # hc-hik-03b. Fits 1996-2006 harley-davidson ultra classic models with the factory radio, cb and cruise control handlebar specs are  height 14″  total width 365″  center width 12″  end rise 14″ pullback 7″. This kit includes new chrome controls, chrome switch housings, chrome switches with new wiring harnesses and factory plugs attached. Motion pro stainless braided cables and hill country customs stainless braided brake lines have chrome ends and a clear uv resistant plastic armor coat to protect your paint and keep them looking good for a long time protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life. This is the most complete ape hanger handlebar kit that you will find on amazon we provide you with a completely assembled “plug & play” handlebar set up that includes new controls, switches and wiring harnesses with factory plugs included are the correct extended length cables and front brake line that fit your harley-davidson model all you will reuse from your existing set up is the grips unless you purchase new ones.

 

BKRider Chrome Switch Covers with Radio and Cruise for Harley-Davidson

BKRider Chrome Switch Covers with Radio and Cruise for Harley-Davidson

BKRider Chrome Switch Covers with Radio and Cruise for Harley-Davidson - Sold as set. Snap on covers mount over existing black switches. Bkrider chrome switch covers with radio and cruise for harley-davidsonfits harley-davidson 1996+chrome switch cover set. Upgrade your existing switches to these new chrome style design without having to replace and re-wire the existing switches.

 

Hill Country Customs Chrome 6 Pc Switch Cap Set for 1996-2013 Harley-Davidson models without Radio - HC-16-0128

Hill Country Customs Chrome 6 Pc Switch Cap Set for 1996-2013 Harley-Davidson models without Radio – HC-16-0128

Hill Country Customs Chrome 6 Pc Switch Cap Set for 1996-2013 Harley-Davidson models without Radio – HC-16-0128 - Fits 1996-2013 harley-davidson models without radio or cruise control except for 2011-2013 softails and 2012-2013 dyna models which are available as a different number. 6 piece chrome switch cap set that replaces the plain stock black caps. Simple to install, just take apart the switch housings, snap off the old caps and snap on the new caps. Chrome plated plastic caps for that nice appearance.

 

Hill Country Customs Jenson AM-FM XM Ready Radio for 1998-2013 Harley-Davidson Touring models with Fairings - HC-HD1BT

Hill Country Customs Jenson AM-FM, XM Ready Radio for 1998-2013 Harley-Davidson Touring models with Fairings – HC-HD1BT

Hill Country Customs Jenson AM-FM, XM Ready Radio for 1998-2013 Harley-Davidson Touring models with Fairings – HC-HD1BT - Am-fm tuner has 12 am and 18 fm presets available weatherband with weather alert included. Siriusxm capable allows you to play xm music once you purchase the sirius xm adapter and subscription from sirius (not included). This radio is plug n play with the factory radio connectors and works with the factory handlebar controls. New jenson am-fm, xm ready sterio radio that is a direct fit for 1998-2013 harley-davidson touring models with fairings. Fits 1998-2013 harley-davidson touring models with fairings including street glide, electra glide & road glide note this radio will not operate cb, intercom, headset or rear speaker fader functions on ultra models please read the description for more information.

 

Hill Country Customs Jenson USB 18 Auxiliary Input Jack for Jenson Harley-Davidson HD1BT radios - HC-JENAUX

Hill Country Customs Jenson USB & 1/8″ Auxiliary Input Jack for Jenson Harley-Davidson HD1BT radios – HC-JENAUX

Hill Country Customs Jenson USB & 1/8″ Auxiliary Input Jack for Jenson Harley-Davidson HD1BT radios – HC-JENAUX - The usb port allows for a connection of an external storage device. The panel mounts through a 1 1/2″ diameter hole with a threaded housing and knurled securing nut. The 1/8″ audio jack allows input of any mp3 player or other external audio device. The included cable is 10 ft long and is astm b117 salt spray exposure standard compliant. Jenson usb and 1/8″ auxiliary input jack for use with the jenson harley-davidson hd1bt radio.

 

Hill Country Customs Chrome 10 Pc Switch Cap Set for 1996-2013 Harley-Davidson Touring models wRadio Cruise - HC-16-0130

Hill Country Customs Chrome 10 Pc Switch Cap Set for 1996-2013 Harley-Davidson Touring models w/Radio & Cruise – HC-16-0130

Hill Country Customs Chrome 10 Pc Switch Cap Set for 1996-2013 Harley-Davidson Touring models w/Radio & Cruise – HC-16-0130 - 10 piece chrome switch cap set that replaces the plain stock black caps. Fits 1996-2013 harley-davidson touring models with the factory harley radio and cruise control. Chrome plated plastic caps for that nice appearance. Simple to install, just take apart the switch housings, snap off the old caps and snap on the new caps.

 

Dragonfly Cycle Concepts 23240-13 2 or 4-Channel Amplifier Harness for an Aftermarket Radio on a Harley Davidson Electra Glide Standard Classic Ultra Classic Street Glide and Road Glide

Dragonfly Cycle Concepts 23240-13 2 or 4-Channel Amplifier Harness for an Aftermarket Radio on a Harley Davidson Electra Glide Standard, Classic, Ultra Classic, Street Glide and Road Glide

Dragonfly Cycle Concepts 23240-13 2 or 4-Channel Amplifier Harness for an Aftermarket Radio on a Harley Davidson Electra Glide Standard, Classic, Ultra Classic, Street Glide and Road Glide - 2 or 4-channel amplifier harness for an aftermarket radio on a harley davidson 1998-2013 electra glide standard, classic, ultra classic, 2006-2013 street glide and 1998-2013 road glide. Made with sturdy, high quality materials, you’re sound will be crisp and the wiring will look clean. Our amplifier harness is used to hook up a 2 or 4 channel amplifier to an aftermarket radio.

 

96-2013 HARLEY DAVIDSON MOTORCYCLE CAR STEREO RADIO AMPLIFIER TRUE 420 WATT RADIO STEREO ADAPTER

96-2013 HARLEY DAVIDSON MOTORCYCLE CAR STEREO RADIO AMPLIFIER TRUE 420 WATT RADIO STEREO ADAPTER

96-2013 HARLEY DAVIDSON MOTORCYCLE CAR STEREO RADIO AMPLIFIER TRUE 420 WATT RADIO STEREO ADAPTER - Built in high/low pass filters allow the use of this amplifier for a broader variety of applications. Prv micro size massive power amplifier over 400 true rms watts nothing else like it. True 105 x 4 420watts, twice the power of kenwood or clarion 1/2 the cost of rockford. Rated rms power at 144 v at 2 ohms 4 x 105 watts. Micro size 2″ x 5″ x 6″ fits in fairing easily.

 

Dragonfly Cycle Concepts 23210-13 2-Channel Amplifier Harness for Harley Davidson OEM Radio Electra Glide Standard Classic Ultra Classic Street Glide and Road Glide

Dragonfly Cycle Concepts 23210-13 2-Channel Amplifier Harness for Harley Davidson OEM Radio, Electra Glide Standard, Classic, Ultra Classic, Street Glide and Road Glide

Dragonfly Cycle Concepts 23210-13 2-Channel Amplifier Harness for Harley Davidson OEM Radio, Electra Glide Standard, Classic, Ultra Classic, Street Glide and Road Glide - Our amplifier harness is used to hook up a 2-channel amplifier to the harley davidson oem radio. Made with sturdy, high quality materials, you’re sound will be crisp and the wiring will look clean. 2-channel amplifier harness for harley davidson oem radio, 1998 -2013 electra glide standard, classic, ultra classic, 2006-2013 street glide and 1998-2013 road glide.

 

Harley Davidson Large Amplifier Mount Fits Batwing Bikes with Aftermarket and Stock Radios for All Larger Amps up to 10 X 5

Harley Davidson Large Amplifier Mount Fits Batwing Bikes with Aftermarket and Stock Radios for All Larger Amps up to 10″ X 5″

Harley Davidson Large Amplifier Mount Fits Batwing Bikes with Aftermarket and Stock Radios for All Larger Amps up to 10″ X 5″ - Fits all bikes with the batwing front fairing and will work with both stock harman kardon radio and all aftermarket radios (does not fit 2005 and older with stock radios, road glides and new 2014 + years harleys). Comes with easy to follow full color installation instructions. Will fit all amplfiers up to a bolt pattern of 10″ x 5″ you will have to mark and drill amp hole pattern in the plate, the rest of the kit is direct bolt on. These brackets are made of strong light weight aluminum and comes with all the required hardware(may need extra hardware depending on amp used). Brackets are made from light aluminum that is very rigid , wiring kits also avalible pt# b00l1pnx48.

 

Hill Country Customs Chrome Complete Switch Cap Set for 2014 Newer Harley-Davidson Touring models with Radio Cruise - HC-10-0807

Hill Country Customs Chrome Complete Switch Cap Set for 2014 & Newer Harley-Davidson Touring models with Radio & Cruise – HC-10-0807

Hill Country Customs Chrome Complete Switch Cap Set for 2014 & Newer Harley-Davidson Touring models with Radio & Cruise – HC-10-0807 - Chrome plated plastic caps for that nice appearance. Simple to install, just take apart the switch housings, snap off the old caps and snap on the new chrome caps. Fits 2014 & newer harley-davidson touring models with the factory harley radio and cruise control. Complete chrome switch cap set that replaces the plain stock black caps.

 

PAC HDK001X Radio Replacement Interface for 1998-2013 Harley-Davidson Motorcycles

PAC HDK001X Radio Replacement Interface for 1998-2013 Harley-Davidson Motorcycles

PAC HDK001X Radio Replacement Interface for 1998-2013 Harley-Davidson Motorcycles - Pac audio makes it possible for harley-davidson motorcycle enthusiasts to easily integrate an aftermarket radio into their ride with the hdk001k radio replacement interface for 1998 to 2013 harley-davidson motorcycles. The complete solution kit is designed for select harley fl models with factory fairings. Among other features, it includes a preprogrammed interface that retains the factory handlebar audio controls.

 

Generic Chrome Switch Housings With Radio and Cruise For Harley-Davidson OEM 70223-96C CC652017

Generic Chrome Switch Housings With Radio and Cruise For Harley-Davidson OEM# 70223-96C (CC652017)

Generic Chrome Switch Housings With Radio and Cruise For Harley-Davidson OEM# 70223-96C (CC652017) - Chrome reproductions of the original equipment black housings. Each set features precision die-cast construction, and a high luster chrome finish. Designed to accept the stock switches and throttle assembly. Handlebar switch housings chromefits ’96-later flhtcu, flhtcutg, flhtk, fltr, fltru, and ’02-later flhrc models. Also fits ’02-later flhr models equipped with cruise control. &#9replaces oem# 70223-96c.

 

1 14 Black 15 Z Bar Handlebar Kit for 2007 Harley-Davidson Electra Glide with Radio and Cruise Control - CMPT-697042-EG07C

1 1/4″ Black 15″ Z Bar Handlebar Kit for 2007 Harley-Davidson Electra Glide with Radio and Cruise Control – CMPT-697042-EG07C

1 1/4″ Black 15″ Z Bar Handlebar Kit for 2007 Harley-Davidson Electra Glide with Radio and Cruise Control – CMPT-697042-EG07C - This is the most complete ape hanger handlebar kit that you will find on amazon we provide you with a completely assembled “plug & play” handlebar set up that includes new controls, switches and wiring harnesses with factory plugs included are the correct extended length cables and front brake line that fit your harley-davidson model all you will reuse from your existing set up is the grips unless you purchase new ones. This kit includes new chrome controls, chrome switch housings, chrome switches with new wiring harnesses and factory plugs attached harley-davidson heated grips will not work with these bars since the heater won’t fit inside. Please read the description in it’s entirety and send us an email with your harley’s year, exact model # and tell us if you have cruise control, hydraulic clutch or abs brakes while installing these bars, we recommend replacing the riser bushings, part # hc-hbb102 and installing the 1 piece top clamp 55918-08 installation kits are also available part # hc-hik-04b. Fits 2007 harley-davidson electra glide models with the factory radio and with cruise control handlebar specs are  height 15″ total width 37″ center width 15″ pullback 85″. Motion pro stainess braided cables and hill country customs stainless braided brake lines have chrome ends and a clear uv resistant plastic armor coat to protect your paint and keep them looking good for a long time ptfe protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life.

 

Harley Davidson Amplifier Mounting Brackets fit batwing bikes with stock radio for rockford PBR-300x2 PBR-300x4 amps

Harley Davidson Amplifier Mounting Brackets fit batwing bikes with stock radio for rockford PBR-300×2 & PBR-300×4 amps

Harley Davidson Amplifier Mounting Brackets fit batwing bikes with stock radio for rockford PBR-300×2 & PBR-300×4 amps - The rockford fosgate pbr300x2 and pbr300x4 will mount directly to precut holes in the brackets. Fits all bikes with the batwing front fairing and the stock harman kardon radio (does not fit aftermarket radios, 2005 or older stock radios, road glides and new 2014 + years) check my other item of brackets for these bikes. These brackets are made of strong light weight 1/8 inch (0125) aluminum that is also good for heat distribution . Comes with easy to follow full color installation instructions. Will fit other model amps with a little modifications , wiring kits also avalible pt# b00l1pnx48.

 

BKrider LED Chrome Handlebar Switch Kit for 2007 Harley-Davidson Touring with Radio Accessory C01052476

BKrider LED Chrome Handlebar Switch Kit for 2007+ Harley-Davidson Touring with Radio Accessory (C01052476)

BKrider LED Chrome Handlebar Switch Kit for 2007+ Harley-Davidson Touring with Radio Accessory (C01052476) - Bkrider led chrome handlebar switch kit for 2007+ harley-davidson touring with radio accessoryfits 1996-06 fl models with radio & cruise&#9led switch kits in chrome&#9&#9feature color coded wires&#9ready to install&#9all kits have 60″ wiressold as kit.

 

Hill Country Customs 1 14 BBlack 20 Ape Hangers Kit for 1996-2006 Harley-Davidson Ultra Classic WRadio CB Cruise - CP-HC-BB20GBB-UC06-RCCB

Hill Country Customs 1 1/4″ BBlack 20″ Ape Hangers Kit for 1996-2006 Harley-Davidson Ultra Classic W/Radio CB & Cruise – CP-HC-BB20GBB-UC06-RCCB

Hill Country Customs 1 1/4″ BBlack 20″ Ape Hangers Kit for 1996-2006 Harley-Davidson Ultra Classic W/Radio CB & Cruise – CP-HC-BB20GBB-UC06-RCCB - Hill country customs black vinyl coated cables and black vinyl coated stainless brake lines have chrome ends which look really good protective inner liners insure smooth cable operation, prevent brake line expansion and insure longer life. Fits 1996-2006 harley-davidson ultra classic models with the factory radio, cb and cruise control handlebar specs are  height 20″  total width 365″  center width 12″  end rise 20″ pullback 7″. This kit includes new gloss black powder coated controls, gloss black switch housings, black switches with new wiring harnesses and factory plugs attached. This is the most complete ape hanger handlebar kit that you will find on amazon we provide you with a completely assembled “plug & play” handlebar set up that includes new controls, switches and wiring harnesses with factory plugs included are the correct extended length cables and front brake line that fit your harley-davidson model all you will reuse from your existing set up is the grips unless you purchase new ones. Please read the description in it’s entirety and send us an email with your harley’s year, exact model # and tell us if you have fuel injection, cruise control, hydraulic clutch or abs brakes while installing these bars, we recommend replacing the riser bushings, part # hc-hbb102 and installing the 1 piece top clamp 55918-08 installation kits are also available 1996-1998 model part # hc-hik-01b, 1999-2004 model part # hc-hik-02b, 2005-2006 model part # hc-hik-03b.

 

Hill Country Customs Chrome 8 Pc Switch Cap Set for 1996-2013 Harley-Davidson Touring models with Radio only - HC-16-0129

Hill Country Customs Chrome 8 Pc Switch Cap Set for 1996-2013 Harley-Davidson Touring models with Radio only – HC-16-0129

Hill Country Customs Chrome 8 Pc Switch Cap Set for 1996-2013 Harley-Davidson Touring models with Radio only – HC-16-0129 - Chrome plated plastic caps for that nice appearance. 8 piece chrome switch cap set that replaces the plain stock black caps. Fits 1996-2013 harley-davidson touring models with the factory harley radio. Simple to install, just take apart the switch housings, snap off the old caps and snap on the new caps.