Best Custom Gas Tank out of top 18 for 2017

 

Paughco Extra Narrow Tunnel Custom 24 Gallon Gas Tank

Paughco Extra Narrow Tunnel Custom 2.4 Gallon Gas Tank

Paughco Extra Narrow Tunnel Custom 2.4 Gallon Gas Tank - Horseshoe mounting tab in front. Single cap, wide mustang style tank. 24 gallon capacity. Dimensions 16-1/2in tank length, 9in tank width, 7in tank depth, 2-1/4in tunnel depth, 2-1/4in tunnel width, 17in centerline hole-to-hole on mounting brackets. Comes with two 1/4in petcock outlets.

 

DK Custom Products Harley-Davidson Sportster Model 2 Gas Tank Lift Kit DK-SPT-TLK

DK Custom Products Harley-Davidson Sportster Model 2″ Gas Tank Lift Kit DK-SPT-TLK

DK Custom Products Harley-Davidson Sportster Model 2″ Gas Tank Lift Kit DK-SPT-TLK - American made. Turn your handlebars all the way to the left and raise the tank up your desired lift height to check for clearance issues. This is the top of the line premium 2″ tank lift kit. Turn your handlebars all the way to the right and raise the tank up your desired lift height to check for clearance issues. With bike on kickstand, take the bolt out of the front of your tank. 2. Please make sure this mod does not interfere with any components or mods that have been done to your bike, like custom trees, handlebars, turn signals, etc. We are not responsible for any damage done to your bike because of the kit. Loosen (do not remove) the bolt at the rear of your tank. No extra metal or holes for multiple fitments, the lines match the lines of the bike. It is easy to check for clearance 1. This is an easy install, 10 to 20 minutes fits 1995-up sportster ~ nightster ~ iron ~ 48 ~ 72 ~ superlow ~ low ~ custom if your tank has rubber grommets in the front tank ears (this is possible on 1995-2003 models), please make sure to let us know so we can send the special tank lift brackets for your bike. Provides better air-flow, engine runs cooler gives you room to tuck the wires under the tank if you wish. 4. 3. Give your bike a radical new look cleans up the lines of the bike, gives it a stretched chopper look.

 

Custom Harley-Davidson Dyna Glide Gas Tank Lift Kit 3 inch Fits 2010-Up

Custom Harley-Davidson Dyna Glide Gas Tank Lift Kit 3 inch, Fits 2010-Up

Custom Harley-Davidson Dyna Glide Gas Tank Lift Kit 3 inch, Fits 2010-Up - Easy installation, no gas tank removal necessary. Unique and truly custom design to make your bike stand out fits 2010-up dynas. Available in 15″, 2″, 25″, and 3″ tank lift heights. Lifetime warranty and 100% made in the usa. Includes all necessary installation hardware, complete step-by-step instructions.

 

LowBrow Customs P-Nut Gas Tank - Welded Mounting Tabs 001626

LowBrow Customs P-Nut Gas Tank – Welded Mounting Tabs 001626

LowBrow Customs P-Nut Gas Tank – Welded Mounting Tabs 001626 - At just 2 gallons, our new p-nut is about as small as a chopper tank can get. Lower fuel capacity means you’ll have more time for bumming smokes and shooting the breeze at every gas stop. Tanks are pressure tested at the factory, but it is highly recommended you or your painter pressure test it again before painting it’s cheap insurance tank measurements the total length is 14-1/2″ (16-3/4″ end of tab to end of tab), 7-1/2″ tall (8-3/8″ to top of filler bung), and 8-3/4″ at the widest point. It takes a british-style gas cap for unparalleled chopper authenticity. Nothing changes the look of your hand-built death trap like a new gas tank. One great way to save money at the pump is to buy less at every fill-up. The tunnel measures 1-3/4″ wide, 2-1/4″ deep at the tank rear and 5-3/4″ deep at the front of the tunnel. Lowbrow customs is stoked to be offering this wassell style peanut tank. The lowbrow p-nut tank features heavy gauge steel construction, 1/4″ npt petcock bungs and undrilled diy mounting tabs for custom installation. No more scouring ebay or swap meets and over-paying for an old tank that is rusty, crusty, and likely needs work to repair leaky seams. Our tanks are heavier gauge than the originals, brand new and ready to rock produced in a partnership between lowbrow customs & cleveland cyclewerks.

 

Paughco 804 Gas Tank Custom s 22 Gallon Mustang

Paughco 804 Gas Tank (Custom s ,2.2 Gallon Mustang)

Paughco 804 Gas Tank (Custom s ,2.2 Gallon Mustang) - Accept 66-72 style vented gas caps (sold separately). Dished tank style features a bung for cam-style gas cap, a bung for late-model 22mm petcock and a hole-to-hole center line on mounting brackets of 163/4″. 1-piece fat bob style features a left side external petcock outlet, indent on tank bottom for rocker box clearance and a hole-to-hole center line on mounting brackets of 193/4″. Extra wide mustang-type features a high tunnel for the “fat bob” look, one left-side petcock outlet and a hole-to-hole center line on mounting brackets of 1711/16″. Narrow mustang-type features a single-cap, two petcock outlets, straight mounting tabs and a hole-to-hole center line on mounting brackets of 171/2″.

 

Custom Harley-Davidson Softail Gas Tank Lift Kit 2 inch

Custom Harley-Davidson Softail Gas Tank Lift Kit 2 inch

Custom Harley-Davidson Softail Gas Tank Lift Kit 2 inch - Easy installation, no gas tank removal necessary. Unique and truly custom design to make your bike stand out. Available in 15″, 2″, 25″, and 3″ tank lift heights. Lifetime warranty and 100% made in the usa. Includes all necessary installation hardware, complete step-by-step instructions.

 

Speed Dealer Customs Accent Machined Fucking Gas Tank Cap for Harley 1983-2013 Softail Dyna Sportster

Speed Dealer Customs Accent Machined Fucking Gas Tank Cap for Harley 1983-2013 Softail Dyna Sportster

Speed Dealer Customs Accent Machined Fucking Gas Tank Cap for Harley 1983-2013 Softail Dyna Sportster - Clockwise/right hand thread. Unique two piece design for clocking letters. Cnc machined from solid 6061-t6 billet aluminum, made in the usa. All speed dealer products are road test and quality assurance approved. Stage 3 military grade hard black anodized then accent machined for a custom look.

 

Custom Harley-Davidson Touring Gas Tank Lift Kit 2 inch

Custom Harley-Davidson Touring Gas Tank Lift Kit 2 inch

Custom Harley-Davidson Touring Gas Tank Lift Kit 2 inch - Easy installation, no gas tank removal necessary. Lifetime warranty and 100% made in the usa. Includes all necessary installation hardware, complete step-by-step instructions. Available in 15″, 2″, 25″, and 3″ tank lift heights. Unique and truly custom design to make your bike stand out.

 

Speed Dealer Customs Black Fucking Gas Tank Cap for Harley 1983-2013 Softail Dyna Sportster

Speed Dealer Customs Black Fucking Gas Tank Cap for Harley 1983-2013 Softail Dyna Sportster

Speed Dealer Customs Black Fucking Gas Tank Cap for Harley 1983-2013 Softail Dyna Sportster - Unique two piece design for clocking letters. All speed dealer products are road test and quality assurance approved. Cnc machined from solid 6061-t6 billet aluminum, made in the usa. Clockwise/right hand thread. Stage 3 military grade hard black anodized then accent machined for a custom look.

 

Speed Dealer Customs Black Pointed Gas Cap for Harley 1973-1982 Shovelhead Tank

Speed Dealer Customs Black Pointed Gas Cap for Harley 1973-1982 Shovelhead Tank

Speed Dealer Customs Black Pointed Gas Cap for Harley 1973-1982 Shovelhead Tank - Stage 3 military grade black anodized. Designed for shovelhead models with single cap tanks years 1973-1982 will fit several aftermarket tanks as well. We offer matching oil caps in this style, checkout our store. All speed dealer products are road test and quality assurance approved. Cnc machined from solid billet aluminum, made in the usa.

 

Speed Dealer Customs Brass Fucking Gas Tank Cap for Harley 1983-2013 Softail Dyna Sportster

Speed Dealer Customs Brass Fucking Gas Tank Cap for Harley 1983-2013 Softail Dyna Sportster

Speed Dealer Customs Brass Fucking Gas Tank Cap for Harley 1983-2013 Softail Dyna Sportster - Clockwise/right hand thread. All speed dealer products are road test and quality assurance approved. Unique two piece design for clocking letters. Hand polished to a mirror finish. Cnc machined from solid 360 brass, made in the usa.

 

Petcock Gas Fuel Tank Switch for YAMAHA V Star 650 XVS650 Custom 2001 2002 2003

Petcock Gas Fuel Tank Switch for YAMAHA V Star 650 XVS650 Custom 2001 2002 2003

Petcock Gas Fuel Tank Switch for YAMAHA V Star 650 XVS650 Custom 2001 2002 2003 - New replacement petcock gas fuel tank switch for yamaha v star 650 xvs650 custom 2001 2002 2003.

 

Custom Chrome EFI 33 gal OEM Gas Tank screw bung for 07-13 XL

Custom Chrome EFI 3.3 gal OEM Gas Tank screw bung for 07-13 XL

Custom Chrome EFI 3.3 gal OEM Gas Tank screw bung for 07-13 XL - These are bare metal tanks that will need to prepped and pressure tested prior to fitting on motorcycle. Efi tanks for late sportsters whether you need to replace a damaged tank or just want to add some style to your ride, we have the tank for you. These tanks accept the stock fuel pumpand come with or without indents and are available with oem style screw in caps (sold separately) or our raised custom cap (included) note tanks come unsealed and unpainted.

 

Custom Harley-Davidson Sportster Gas Tank Lift Kit 25 inch Fits 1986-2003

Custom Harley-Davidson Sportster Gas Tank Lift Kit 2.5 inch, Fits 1986-2003

Custom Harley-Davidson Sportster Gas Tank Lift Kit 2.5 inch, Fits 1986-2003 - Unique and truly custom design to make your bike stand out. Easy installation, no gas tank removal necessary. Available in 15″, 2″, 25″, and 3″ tank lift heights. Lifetime warranty and 100% made in the usa. Includes all necessary installation hardware, complete step-by-step instructions.

 

Paughco Dished Custom Gas Tank - 50 Gal 830IL2

Paughco Dished Custom Gas Tank – 5.0 Gal. 830IL2

Paughco Dished Custom Gas Tank – 5.0 Gal. 830IL2 - All tanks equipped with bung for cam-style gas cap and a bung. Comes with bare metal finish and have been pressure tested. Old school dished look. For late model 22mm petcocks. Easy mount and compact size fits most frame backbones.

 

Custom Harley-Davidson Touring Gas Tank Lift Kit 3 inch

Custom Harley-Davidson Touring Gas Tank Lift Kit 3 inch

Custom Harley-Davidson Touring Gas Tank Lift Kit 3 inch - Available in 15″, 2″, 25″, and 3″ tank lift heights. Unique and truly custom design to make your bike stand out. Includes all necessary installation hardware, complete step-by-step instructions. Easy installation, no gas tank removal necessary. Lifetime warranty and 100% made in the usa.

 

Custom Harley-Davidson Sportster Gas Tank Lift Kit 2 inch Fits 2004-Up

Custom Harley-Davidson Sportster Gas Tank Lift Kit 2 inch, Fits 2004-Up

Custom Harley-Davidson Sportster Gas Tank Lift Kit 2 inch, Fits 2004-Up - Easy installation, no gas tank removal necessary. Lifetime warranty and 100% made in the usa. Includes all necessary installation hardware, complete step-by-step instructions. Available in 15″, 2″, 25″, and 3″ tank lift heights. Unique and truly custom design to make your bike stand out.

 

Custom Harley-Davidson Dyna Glide Gas Tank Lift Kit 3 inch Fits 1995-2009

Custom Harley-Davidson Dyna Glide Gas Tank Lift Kit 3 inch, Fits 1995-2009

Custom Harley-Davidson Dyna Glide Gas Tank Lift Kit 3 inch, Fits 1995-2009 - Unique and truly custom design to make your bike stand out fits 1995-2009 dynas. Available in 15″, 2″, 25″, and 3″ tank lift heights. Lifetime warranty and 100% made in the usa. Includes all necessary installation hardware, complete step-by-step instructions. Easy installation, no gas tank removal necessary.