Best and Coolest 57 Axle Sliders

 

2013-2018 Kawasaki ZX6R Front Axle Sliders - 702-4429 - MADE IN THE USA

2013-2018 Kawasaki ZX6R Front Axle Sliders – 702-4429 – MADE IN THE USA

2013-2018 Kawasaki ZX6R Front Axle Sliders – 702-4429 – MADE IN THE USA - Shogun axle sliders the makers of shogun frame sliders up the ante with shogun axle sliders shogun axle sliders are manufactured to the same precision and quality control standards as shogun frame sliders axle sliders help protect expensive suspension components in the event of a crash and may significantly reduce the cost of repair. Each slider is made of the same proprietary plastics blend as shogun frame sliders each uv resistant puck is shaped to accommodate a spool lift stand, in addition to other types of stands several shogun axle slider kits like honda, kawasaki, suzuki and yamaha units come with a cnc machined stainless steel axle nut some other manufacturers of axle sliders do not let the rider know that there is a lot of unnecessary effort involved in the installation of their kits. Made in the usa. No need to drill through your stock axle nut, shogun provides one for you that is the same grade or better than oem rod component is machined, not an all-thread piece a machined rod has fewer stress risers than all thread and therefore greater structural integrity during a crash well written instructions with color photos make installing each unit fast and easy, with minimal modification necessary to your motorcycle.

 

2007-2012 Honda CBR600RR Front Axle Sliders - 702-3319 - MADE IN THE USA

2007-2012 Honda CBR600RR Front Axle Sliders – 702-3319 – MADE IN THE USA

2007-2012 Honda CBR600RR Front Axle Sliders – 702-3319 – MADE IN THE USA - No need to drill through your stock axle nut, shogun provides one for you that is the same grade or better than oem rod component is machined, not an all-thread piece a machined rod has fewer stress risers than all thread and therefore greater structural integrity during a crash well written instructions with color photos make installing each unit fast and easy, with minimal modification necessary to your motorcycle. Shogun axle sliders the makers of shogun frame sliders up the ante with shogun axle sliders shogun axle sliders are manufactured to the same precision and quality control standards as shogun frame sliders axle sliders help protect expensive suspension components in the event of a crash and may significantly reduce the cost of repair. Made in the usa. Each slider is made of the same proprietary plastics blend as shogun frame sliders each uv resistant puck is shaped to accommodate a spool lift stand, in addition to other types of stands several shogun axle slider kits like honda, kawasaki, suzuki and yamaha units come with a cnc machined stainless steel axle nut some other manufacturers of axle sliders do not let the rider know that there is a lot of unnecessary effort involved in the installation of their kits.

 

R&G Offset Cotton Reel Axle Slider rears Honda NC700SX  NC750SX

R&G Offset “Cotton Reel” Axle Slider (rear)s, Honda NC700S/X / NC750S/X

R&G Offset “Cotton Reel” Axle Slider (rear)s, Honda NC700S/X / NC750S/X - These cotton reels specifically designed to fit the honda nc700x/s/dct/ models, nc750x model and honda integra 700/750 models. Additionally they have the ability to be fitted with a toe guard thanks to a mounts already present on the cotton reel bracket. The product will give protection to the swingarm area in most crashes. Also the bike can be lifted on the cotton reels, using a paddock stand with hooks (suggest r&g code sh0001). An r&g toe guard (not included) can be install into this product with no modification to the swingarm required, it simply screws into the bottom of the cotton reel bracket. Are they cotton reels or spindle sliders well they are both reallythe cotton reel is mounted to a special, black-anodised stainless steel bracket (included with the kit).

 

KTM Axle Sliders Front RC390390 Duke 90109945000

KTM Axle Sliders Front RC390/390 Duke 90109945000

KTM Axle Sliders Front RC390/390 Duke 90109945000 - Ktm axle sliders front rc390/390 duke. Protects the fork from damage in the event of a minor crash.

 

R&G Racing Fork Axle Sliders Protectors for Honda MSX125 GROM FP0102BK

R&G Racing Fork Axle Sliders Protectors for Honda MSX125 GROM FP0102BK

R&G Racing Fork Axle Sliders Protectors for Honda MSX125 GROM FP0102BK - Designed to help eliminate damage during a drop. No need to drill through your stock axle nut, shogun provides one for you that is the same grade or better than oem rod component is machined, not an all-thread piece a machined rod has fewer stress risers than all thread and therefore greater structural integrity during a crash well written instructions with color photos make installing each unit fast and easy, with minimal modification necessary to your motorcycle. Made in the usa. Each slider is made of the same proprietary plastics blend as shogun frame sliders each uv resistant puck is shaped to accommodate a spool lift stand, in addition to other types of stands several shogun axle slider kits like honda, kawasaki, suzuki and yamaha units come with a cnc machined stainless steel axle nut some other manufacturers of axle sliders do not let the rider know that there is a lot of unnecessary effort involved in the installation of their kits.

 

T-Rex Racing 2008 - 2016 Yamaha WR250R  WR250X No Cut Frame Sliders Front Rear Axle Sliders Combo

T-Rex Racing 2008 – 2016 Yamaha WR250R / WR250X No Cut Frame Sliders Front & Rear Axle Sliders Combo

T-Rex Racing 2008 – 2016 Yamaha WR250R / WR250X No Cut Frame Sliders Front & Rear Axle Sliders Combo - The bolt is made of solid stainless steel. The slider pucks are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications. This purchase is for a pair of frame, front and rear axle sliders for the above bike model. Rest assured that you are getting the best material commercially available.

 

R&G Axle Slider rear for Yamaha FZ-07 14-15

R&G Axle Slider (rear) for Yamaha FZ-07 ’14-’15

R&G Axle Slider (rear) for Yamaha FZ-07 ’14-’15 - These easy to install rear swingarm protectors are suitable for the yamaha mt-07 ’14-. They fit to the rear spindle and provide added protection to the swingarm area.

 

T-Rex Racing 2009-2015 Yamaha VMAX Front Axle Sliders

T-Rex Racing 2009-2015 Yamaha VMAX Front Axle Sliders

T-Rex Racing 2009-2015 Yamaha VMAX Front Axle Sliders - However, due to constant improvement, the frame sliders can sometimes vary slightly from those in the picture. The slider puck are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. The frame sliders that you will receive will most likely be the ones pictured above. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications. The bar is made of stainless steel. Rest assured that you are getting the best material commercially available. This purchase is for a set of front axle sliders for the above bike models. Delrin is harder but more brittle. Compared to delrin, it is softer but tougher. The slider pucks can be inexpensively replaced in case of a low-side. It is an ideal material for slider since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine.

 

SPEEDYMOTO Front Axle Slider Most Ducati 10-0201

SPEEDYMOTO Front Axle Slider: Most Ducati 10-0201

SPEEDYMOTO Front Axle Slider: Most Ducati 10-0201 - ◾The kit is comprised of superior hdpe plastic sliders. ◾Exceptionally strong anodized aluminum support rod that is highly resistant to corrosion. ◾kit includes stainless hardware. The speedymoto ducati front axle slider kit is the strongest system available on the market.

 

R&G Racing Fork Axle Sliders Protectors for Ducati 1199 899 Panigale FP0109BK

R&G Racing Fork Axle Sliders Protectors for Ducati 1199 & 899 Panigale FP0109BK

R&G Racing Fork Axle Sliders Protectors for Ducati 1199 & 899 Panigale FP0109BK - Made in the usa. Each slider is made of the same proprietary plastics blend as shogun frame sliders each uv resistant puck is shaped to accommodate a spool lift stand, in addition to other types of stands several shogun axle slider kits like honda, kawasaki, suzuki and yamaha units come with a cnc machined stainless steel axle nut some other manufacturers of axle sliders do not let the rider know that there is a lot of unnecessary effort involved in the installation of their kits. Shogun axle sliders the makers of shogun frame sliders up the ante with shogun axle sliders shogun axle sliders are manufactured to the same precision and quality control standards as shogun frame sliders axle sliders help protect expensive suspension components in the event of a crash and may significantly reduce the cost of repair. Designed to help eliminate damage during a drop.

 

T-Rex Racing 2014-2016 BMW R nineT Rear Axle Sliders

T-Rex Racing 2014-2016 BMW R nineT Rear Axle Sliders

T-Rex Racing 2014-2016 BMW R nineT Rear Axle Sliders - You will receive the exact kit shown in the top most picture. No cut or plastic fairings modification required. Special feature brackets are designed not to rotate in a lowside. Fit models bmw 2014, 2016 r ninet. Material = uhmw-pe (ultra high molecular weight polyethylene) and solid steel brackets finished in durable black powder coat.

 

T-Rex Racing 2013 - 2017 Yamaha FZ-09  MT-09  FJ-09 No Cut Frame Front Rear Axle Sliders Spools - Red

T-Rex Racing 2013 – 2017 Yamaha FZ-09 / MT-09 / FJ-09 No Cut Frame Front & Rear Axle Sliders Spools – Red

T-Rex Racing 2013 – 2017 Yamaha FZ-09 / MT-09 / FJ-09 No Cut Frame Front & Rear Axle Sliders Spools – Red - Fit models  2013, 2017 yamaha fz-09 / mt-09 / fj-09. Special feature the pucks are solid and not hollow, made to withstand a greater impact brackets are designed not to rotate in a lowside. Material = uhmw-pe (ultra high molecular weight polyethylene) and a aircraft grade aluminum 6061-t6 brackets finished in black anodizing for durability. No cut or plastic fairings modification required. You will receive the exact kit shown in the top most picture.

 

T-Rex Racing 2008-2015 Suzuki Hayabusa GSX-R1300 Rear Axle Sliders

T-Rex Racing 2008-2015 Suzuki Hayabusa GSX-R1300 Rear Axle Sliders

T-Rex Racing 2008-2015 Suzuki Hayabusa GSX-R1300 Rear Axle Sliders - The replacement nut and cross bar are made of 304 grade stainless steel for strength and rust-resistance. The purchase is for a pair of rear axle sliders for above bike models. Rest assured that you are getting the best material commercially available. The nuts are made of grade 8, nylon lock type so they won’t back out under normal engine vibration. The slider pucks are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensional stable than nylon and used in many industrial ball bearing and friction reducing applications.

 

T-Rex Racing 2000 to 2015 SUZUKI DR-Z 400S DR-Z 400E DR-Z 400SM Front Axle Sliders

T-Rex Racing 2000 to 2015 SUZUKI DR-Z 400S DR-Z 400E DR-Z 400SM Front Axle Sliders

T-Rex Racing 2000 to 2015 SUZUKI DR-Z 400S DR-Z 400E DR-Z 400SM Front Axle Sliders - Rest assured that you are getting the best material commercially available. The frame sliders that you will receive will most likely be the ones pictured above. It helps protect your bikes front fork in case of a low-side. The installation is a simple bolt on with the bar going through the axle and one plastic puck on each side. 9(177,000 psi in tensile strength). It allows the fork to slide on the plastic puck instead of the fork itself. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications. However, due to constant improvement, the frame sliders can sometimes vary slightly from those in the picture. The long bar is made of billet aluminum. The sliders are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. This purchase is for suzuki front axle / fork sliders for above bike models. The bolts are made of highest grade commercially available 12.

 

T-Rex Racing 1996 - 2018 Suzuki DR650  S  SE Front Axle Sliders

T-Rex Racing 1996 – 2018 Suzuki DR650 / S / SE Front Axle Sliders

T-Rex Racing 1996 – 2018 Suzuki DR650 / S / SE Front Axle Sliders - The long bar is made of billet aluminum. The sliders are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. The frame sliders that you will receive will most likely be the ones pictured above. Designed to help protect your bike in case of a low-side. Rest assured that you are getting the best material commercially available. This purchase is for a a pair of front axle sliders for the above models. The installation is a simple bolt on with the bar going through the axle and one plastic puck on each side. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications. 9(177,000 psi in tensile strength). However, due to constant improvement, the frame sliders can sometimes vary slightly from those in the picture. The bolts are made of highest grade commercially available 12.

 

T-Rex Racing 2014-2016 KTM Superduke 1290  R Front Fork Axle Sliders

T-Rex Racing 2014-2016 KTM Superduke 1290 / R Front Fork Axle Sliders

T-Rex Racing 2014-2016 KTM Superduke 1290 / R Front Fork Axle Sliders - It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications. This purchase is for a front axle / fork sliders for above bike models that helps protect your bike expensive fork in case of a low-side. Rest assured that you are getting the best material commercially available. They can be inexpensively replaced in case of a low-side. Installation is a simple bolt on with the bar going through the axle and one plastic puck on each side. The slider pucks are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. The long bar and inserts inside the sliders are made 6061-t6 aluminum for strength.

 

R&G Front Axle Sliders for Yamaha FZ-07 14-15

R&G Front Axle Sliders for Yamaha FZ-07 ’14-’15

R&G Front Axle Sliders for Yamaha FZ-07 ’14-’15 - Easy to install, they help to eliminate damage to the front forks, fork bottoms and brake calipers during a crash or drop. These fork protectors are suitable for the yamaha mt-07 ’14-.

 

T-Rex Racing 2013-2017 Yamaha FZ-07 MT-07 Front Axle Sliders

T-Rex Racing 2013-2017 Yamaha FZ-07 MT-07 Front Axle Sliders

T-Rex Racing 2013-2017 Yamaha FZ-07 MT-07 Front Axle Sliders - Rest assured that you are getting the best material commercially available. The bolt is made of 304 stainless steel. The slider puck is made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. The installation is a simple bolt on with the bar going through the axle and one plastic puck on each side. It is softer than delrin as the result it can absorbs more impact and is less susceptible to cracking. They can be inexpensively replaced in case of a low-side. It is used in many industrial ball bearing and friction reducing applications. This purchase is for front axle / fork sliders for above bike models. It allows the fork to slide on the plastic puck instead of the fork itself. That helps protect your bike front fork in case of a low-side.

 

T-Rex Racing 2017-2018 Kawasaki Ninja 650 ABS Z650 Z900 Front Fork Axle Sliders

T-Rex Racing 2017-2018 Kawasaki Ninja 650 /ABS Z650 Z900 Front Fork Axle Sliders

T-Rex Racing 2017-2018 Kawasaki Ninja 650 /ABS Z650 Z900 Front Fork Axle Sliders - The installation is a simple bolt on with the bar going through the axle and one plastic puck on each side. They can be inexpensively replaced in case of a low-side. The slider puck is made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. This purchase is for a pair of front axle / fork sliders that help protect your bike in case of a low-side. Rest assured that you are getting the best material commercially available. It is softer than delrin as the result it can absorbs more impact and is less susceptible to cracking. It is used in many industrial ball bearing and friction reducing applications. It allows the fork to slide on the plastic puck instead of the fork itself. The bolt is made of 304 stainless steel.

 

T-Rex Racing 2011 - 2014 Ducati Panigale 1199  S  R No Cut Frame Front Rear Quick Release Axle Sliders

T-Rex Racing 2011 – 2014 Ducati Panigale 1199 / S / R No Cut Frame Front & Rear Quick Release Axle Sliders

T-Rex Racing 2011 – 2014 Ducati Panigale 1199 / S / R No Cut Frame Front & Rear Quick Release Axle Sliders - Special feature = the pucks are solid and not hollow, made to withstand a greater impact brackets are designed not to rotate in a lowside. No cut or plastic fairings modification required. Material = uhmw-pe (ultra high molecular weight polyethylene) and a aircraft grade aluminum 6061-t6 bracket finished in black anodizing for durability, and high strength neodymium magnets. Fit models = 2011, 2014 ducati panigale 1199 / s / r.

 

T-Rex Racing 2006 - 2008 Kawasaki Versys 650 Engine Guard Crash Cages Front Axle Sliders Spools - Green

T-Rex Racing 2006 – 2008 Kawasaki Versys 650 Engine Guard Crash Cages Front Axle Sliders Spools – Green

T-Rex Racing 2006 – 2008 Kawasaki Versys 650 Engine Guard Crash Cages Front Axle Sliders Spools – Green - Material = uhmw-pe (ultra high molecular weight polyethylene) and steel tubing finished in durable black powder coat. Free black plastic spools with the purchase of this combo kit. Special featurethe pucks are solid and not hollow, made to withstand a greater impactthe steel tubes are designed not to rotate in a lowside and braced together to increase strength. Fit models 2006, 2014 kawasaki versys 650. No cut or plastic fairings modification required.

 

R&G Axle Sliders rear Ducati Monster 696 08-  795 12

R&G Axle Sliders (rear), Ducati Monster 696 ’08- / 795 ’12

R&G Axle Sliders (rear), Ducati Monster 696 ’08- / 795 ’12 - Material = uhmw-pe (ultra high molecular weight polyethylene). Color = black. Fit models = 2008, 2016 kawasaki zx-10r. Slider dimensions = about 175″ in diameter and 2″ in over all length. No cut or plastic fairings modification.

 

T-Rex Racing 2010 - 2017 BMW S1000R  S1000RR Rear Axle Sliders

T-Rex Racing 2010 – 2017 BMW S1000R / S1000RR Rear Axle Sliders

T-Rex Racing 2010 – 2017 BMW S1000R / S1000RR Rear Axle Sliders - The frame sliders that you will receive will most likely be the ones pictured above. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications. The installation is a simple bolt on with the bar going through the axle and one plastic puck on each side. The long bar and inserts inside the sliders are made 6061-t6 aluminum for strength. They provide indispensable protection for your beautiful expensive swing-arm. However, due to constant improvement, the frame sliders can sometimes vary slightly from those in the picture. This purchase is for a pair of rear axle sliders for above bike models. The slider pucks are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. Rest assured that you are getting the best material commercially available.

 

T-Rex Racing 2008 - 2016 Ducati Diavel Frame Front Quick Release Rear Axle Sliders - Black

T-Rex Racing 2008 – 2016 Ducati Diavel Frame Front Quick Release Rear Axle Sliders – Black

T-Rex Racing 2008 – 2016 Ducati Diavel Frame Front Quick Release Rear Axle Sliders – Black - Fit models = ducati 2008, 2016 diavel. No cut or plastic fairings modification required. Special features = the pucks are solid and not hollow, made to withstand a greater  impact brackets are designed not to rotate in a lowside. Material = uhmw-pe (ultra high molecular weight polyethylene), high strength neodymium magnets, and a aircraft grade aluminum 6061-t6 brackets finished in black anodizing for durability.

 

R&G Racing SS0013BK Rear Axle Slider

R&G Racing SS0013BK Rear Axle Slider

R&G Racing SS0013BK Rear Axle Slider - R&g rear axle sliders/protectors use an axle through-bolt design that serves double duty as a axle and swing arm protector and a spool stand to pick up the rear end for routine adjustments, storage and cleaning.

 

waase GSXR600 GSXR750 2 PCS Front Rear Wheel Fork Axle Sliders Cap Crash Protector For Suzuki GSXR 600 750 2011 2012 2013 2014 2015 2016 2017 Blue

waase GSXR600 GSXR750 2 PCS Front & Rear Wheel Fork Axle Sliders Cap Crash Protector For Suzuki GSXR 600 750 2011 2012 2013 2014 2015 2016 2017 (Blue)

waase GSXR600 GSXR750 2 PCS Front & Rear Wheel Fork Axle Sliders Cap Crash Protector For Suzuki GSXR 600 750 2011 2012 2013 2014 2015 2016 2017 (Blue) - Fitment for suzuki gsxr 600/750 2011-2017 placement on vehicle front & rear note installation instructions not included condition brand new aftermarket item,never used or installed. Quantity one pair(2pcs) color as the picture shown material high quality aluminum alloy,cnc machind.

 

Motorcycle CNC Aluminum Front Axle Slider Frame Sliders Anti Crash Protector for Kawasaki Z800 13-15 Z1000 14-15 Green

Motorcycle CNC Aluminum Front Axle Slider Frame Sliders Anti Crash Protector for Kawasaki Z800 13-15 Z1000 14-15 (Green)

Motorcycle CNC Aluminum Front Axle Slider Frame Sliders Anti Crash Protector for Kawasaki Z800 13-15 Z1000 14-15 (Green) - Fit for kawasaki z800 2013-2015 kawasaki z1000 2014-2015. Designed to help eliminate damage to the front and rear axle during a drop,a skidding stop or a low side. Condition 100% brand new material cnc 6061 billet aluminum item is easy to install without instructions default colorgreen(we have red/orange/gold/green/blue/black/gray option) package include a pair front wheel fork slider protector with install screws two protection pads are easily fixed at either end fork through appropriate passing steel bar.

 

T-Rex Racing All Years Ducati 848  1098  1198  Street Fighter Front Axle Sliders

T-Rex Racing All Years Ducati 848 / 1098 / 1198 / Street Fighter Front Axle Sliders

T-Rex Racing All Years Ducati 848 / 1098 / 1198 / Street Fighter Front Axle Sliders - Fit models = all years ducati 848 / 1098 / 1198 / street fighter front axle sliders. No cutting or modification. Materials = uhmw-pe (ultra high molecular weight polyethylene) and a aircraft grade aluminum 6061-t6 bracket finished in black anodizing for durability. Slider dimensions = approx 4″ in overall length, 2″ in diameter.

 

T-Rex Racing 2004 - 2017 Honda CBR600RR Front Axle Sliders

T-Rex Racing 2004 – 2017 Honda CBR600RR Front Axle Sliders

T-Rex Racing 2004 – 2017 Honda CBR600RR Front Axle Sliders - Rest assured that you are getting the best material commercially available. It allows the fork to slide on the plastic puck instead of the fork itself. 9 (177,000 psi in tensile strength). The bolts are made of highest grade commercially available 12. The installation is a simple bolt on with the bar going through the axle and one plastic puck on each side. The frame sliders that you will receive will most likely be the ones pictured above. The sliders are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. However, due to constant improvement, the frame sliders can sometimes vary slightly from those in the picture. The long bar is made of billet aluminum. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications. This purchase is for a pair of front axle / fork sliders for above bike models that help protect your bike front fork in case of a low-side.

 

T-Rex Racing 2000 - 2016 Suzuki DR-Z400 E  S  SM Rear Axle Sliders

T-Rex Racing 2000 – 2016 Suzuki DR-Z400 E / S / SM Rear Axle Sliders

T-Rex Racing 2000 – 2016 Suzuki DR-Z400 E / S / SM Rear Axle Sliders - The installation is a simple bolt on with the bar going through the axle and one plastic puck on each side. The slider pucks are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. They provide indispensable protection for your beautiful expensive swing-arm. The long bar and inserts inside the sliders are made 6061-t6 aluminum for strength. This purchase is for suzuki rear axle sliders (one lhs and one rhs) that fit the above mention year and models. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications. Rest assured that you are getting the best material commercially available.

 

R&G Axle Sliders front Suzuki DRZ400-SM

R&G Axle Sliders (front), Suzuki DRZ400-SM

R&G Axle Sliders (front), Suzuki DRZ400-SM - Material = uhmw-pe (ultra high molecular weight polyethylene). No cut or plastic fairings modification required. Slider dimensions = approx 15 ” in overall length, 175″ in diameter. Fit models = 2013, 2017 yamaha fz-09 / mt-09 / fj-09.

 

T-Rex Racing 2013 - 2016 Ducati Hypermotard  SP Hyperstrada Rear Axle Sliders - RedCaps

T-Rex Racing 2013 – 2016 Ducati Hypermotard / SP Hyperstrada Rear Axle Sliders – RedCaps

T-Rex Racing 2013 – 2016 Ducati Hypermotard / SP Hyperstrada Rear Axle Sliders – RedCaps - The cross bar are made of 304 grade stainless steel for strength and rust-resistance. This purchase is for a set of rear axle sliders for above bike models. The and inserts inside the sliders are made 6061-t6 aluminum for strength. The nuts are made of grade 8, nylon lock type so they won’t back out under normal engine vibration. They provide indispensable protection for your beautiful expensive swingarm. Rest assured that you are getting the best material commercially available. The slider pucks are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications.

 

T-Rex Racing 2009-2015 Yamaha VMAX Rear Axle Sliders

T-Rex Racing 2009-2015 Yamaha VMAX Rear Axle Sliders

T-Rex Racing 2009-2015 Yamaha VMAX Rear Axle Sliders - It is an ideal material for slider since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. This purchase is for a set of swing-arm or rear axle sliders for the above bike models. However, due to constant improvement, the frame sliders can sometimes vary slightly from those in the picture. Compared to delrin, it is softer but tougher. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications. Delrin is harder but more brittle. The slider puck are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. The bar is made of stainless steel. The frame sliders that you will receive will most likely be the ones pictured above. Rest assured that you are getting the best material commercially available. The slider pucks can be inexpensively replaced in case of a low-side.

 

T-Rex Racing 2018 Triumph Street Triple RS Rear Axle Sliders

T-Rex Racing 2018 Triumph Street Triple RS Rear Axle Sliders

T-Rex Racing 2018 Triumph Street Triple RS Rear Axle Sliders - The installation is a simple bolt on with the bar going through the axle and one plastic puck on each side. This purchase is for a pair of rear axle sliders. Rest assured that you are getting the best material commercially available. The long bar and inserts inside the sliders are made 6061-t6 aluminum for strength. They provide indispensable protection for your beautiful expensive swing-arm. The slider pucks are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications.

 

T-Rex Racing 2008 - 2016 Kawasaki ZX-10R Front Axle Sliders

T-Rex Racing 2008 – 2016 Kawasaki ZX-10R Front Axle Sliders

T-Rex Racing 2008 – 2016 Kawasaki ZX-10R Front Axle Sliders - The bolt is made of 304 stainless steel. It is used in many industrial ball bearing and friction reducing applications. It is softer than delrin as the result it can absorbs more impact and is less susceptible to cracking. Rest assured that you are getting the best material commercially available. This purchase is for a set of front axle / fork sliders for above bike models that help protect your bike in case of a low-side. It allows the fork to slide on the plastic puck instead of the fork itself. The slider puck is made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. The installation is a simple bolt on with the bar going through the axle and one plastic puck on each side. They can be inexpensively replaced in case of a low-side.

 

GENUINE OEM KAWASAKI 2017 Z900 FRONT AXLE SLIDER SET 99994-0837

GENUINE OEM KAWASAKI 2017 Z900 FRONT AXLE SLIDER SET 99994-0837

GENUINE OEM KAWASAKI 2017 Z900 FRONT AXLE SLIDER SET 99994-0837 - Manufactured from durable abs nylon, the functional yet stylish and compact design of these front axle sliders add an extra level of protection to your bike, and help guard your forks from possible tip-over damage. Fitment 2017 kawasaki z900, z900 abs. 99994-0837. Front axle sliders for 2017 z-900.

 

2003-2012 Kawasaki ZX6R ZX6RR 2008-2010 ZX10R 2008-2011 ZX14 2012-2018 ZX14R Front Axle Sliders - 702-4419 - MADE IN THE USA

2003-2012 Kawasaki ZX6R ZX6RR 2008-2010 ZX10R 2008-2011 ZX14 2012-2018 ZX14R Front Axle Sliders – 702-4419 – MADE IN THE USA

2003-2012 Kawasaki ZX6R ZX6RR 2008-2010 ZX10R 2008-2011 ZX14 2012-2018 ZX14R Front Axle Sliders – 702-4419 – MADE IN THE USA - Each slider is made of the same proprietary plastics blend as shogun frame sliders each uv resistant puck is shaped to accommodate a spool lift stand, in addition to other types of stands several shogun axle slider kits like honda, kawasaki, suzuki and yamaha units come with a cnc machined stainless steel axle nut some other manufacturers of axle sliders do not let the rider know that there is a lot of unnecessary effort involved in the installation of their kits. Made in the usa. No need to drill through your stock axle nut, shogun provides one for you that is the same grade or better than oem rod component is machined, not an all-thread piece a machined rod has fewer stress risers than all thread and therefore greater structural integrity during a crash well written instructions with color photos make installing each unit fast and easy, with minimal modification necessary to your motorcycle. Shogun axle sliders the makers of shogun frame sliders up the ante with shogun axle sliders shogun axle sliders are manufactured to the same precision and quality control standards as shogun frame sliders axle sliders help protect expensive suspension components in the event of a crash and may significantly reduce the cost of repair.

 

T-Rex Racing 2016 - 2018 Ducati XDiavel  S Rear Quick Release Axle Sliders

T-Rex Racing 2016 – 2018 Ducati XDiavel / S Rear Quick Release Axle Sliders

T-Rex Racing 2016 – 2018 Ducati XDiavel / S Rear Quick Release Axle Sliders - It is an essential convenience at the track where you can promptly raise your bike as soon as you pull in a paddock. The and inserts inside the sliders are made 6061-t6 aluminum for strength. It also allows one to quickly remove the rear axle sliders without removing any bolts or screws like those in a typical rear axle sliders. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications. Rest assured that you are getting the best material commercially available. The purchase is for a set of rear quick release axle sliders. It facilitates quick removal of the rear wheel. They provide indispensable protection for your beautiful expensive swing-arm. The two sides of the axle sliders are attached by high strength neodymium magnets. The slider pucks are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability.

 

T-Rex Racing 2008 - 2016 Kawasaki ZX-10R Front Axle Sliders

T-Rex Racing 2008 – 2016 Kawasaki ZX-10R Front Axle Sliders

T-Rex Racing 2008 – 2016 Kawasaki ZX-10R Front Axle Sliders - The sliders help protect the forks and caliper during a low-side and suitable for track use. This purchase is for a set of front axle sliders(one lhs and one rhs) for above bike models. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications. The sliders are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. The through bolt is made of aircraft grade stainless steel 304. The nuts are nylon insert lock nuts. They prevent the sliders from becoming loose and fall off under normal engine vibration.

 

T-Rex Racing 2014-2016 KTM Superduke 1290  R Rear Axle Sliders

T-Rex Racing 2014-2016 KTM Superduke 1290 / R Rear Axle Sliders

T-Rex Racing 2014-2016 KTM Superduke 1290 / R Rear Axle Sliders - Rest assured that you are getting the best material commercially available. The and inserts inside the sliders are made 6061-t6 aluminum for strength. The cross bar are made of 304 grade stainless steel for strength and rust-resistance. This purchase is for a rear axle slider. It provides indispensable protection for your beautiful expensive swing-arm. The slider pucks are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. The nuts are made of grade 8, nylon lock type so they won’t back out under normal engine vibration. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications.

 

T-Rex Racing 2013-2015 Yamaha FZ-07 MT-07 Rear Axle Sliders

T-Rex Racing 2013-2015 Yamaha FZ-07 MT-07 Rear Axle Sliders

T-Rex Racing 2013-2015 Yamaha FZ-07 MT-07 Rear Axle Sliders - Rest assured that you are getting the best material commercially available. The slider pucks are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. This purchase is for a pair of rear axle sliders. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications. The long bar and inserts inside the sliders are made 6061-t6 aluminum for strength. The installation is a simple bolt on with the bar going through the axle and one plastic puck on each side. They provide indispensable protection for your beautiful expensive swing-arm.

 

T-Rex Racing 2018 Triumph Street Triple RS Front Axle Sliders

T-Rex Racing 2018 Triumph Street Triple RS Front Axle Sliders

T-Rex Racing 2018 Triumph Street Triple RS Front Axle Sliders - The spacers are made out of air-craft grade 6061-t6 aluminum and coated in a uv-resistant anodized finish. This translates to a significant increase in strength. 9 (177,000 psi in tensile strength). The sliders are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. This purchase is for a set of front axle sliders that fit the above mentioned make and model. Rest assured that you are getting the best material commercially available. The bolts are made of highest grade commercially available 12. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications. Unlike our traditional plastic pucks, the new pucks are completely solid and have up to 30% the surface area than the old ones.

 

R&G Axle Sliders rear Ducati 748848916996998 HYM 7961100 Monster 796 Streetfighter 848

R&G Axle Sliders (rear), Ducati 748/848/916/996/998, HYM 796/1100, Monster 796, Streetfighter 848

R&G Axle Sliders (rear), Ducati 748/848/916/996/998, HYM 796/1100, Monster 796, Streetfighter 848 - Spindle sliders for the rear wheel suitable for the ducati 748, 848, 848 streetfighter, 916, 996, 998, hypermotard 796, hypermotard 1100 & monster s4rs ’07- models.

 

T-Rex Racing 2005 - 2015 Triumph Speed Triple  R Rear Axle Sliders

T-Rex Racing 2005 – 2015 Triumph Speed Triple / R Rear Axle Sliders

T-Rex Racing 2005 – 2015 Triumph Speed Triple / R Rear Axle Sliders - The slider pucks are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. Rest assured that you are getting the best material commercially available. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications. The long bar and inserts inside the sliders are made 6061-t6 aluminum for strength. They provide indispensable protection for your beautiful expensive swing-arm. This purchase is for a rear axle sliders (one lhs and one rhs) for the above bike models. The installation is a simple bolt on with the bar going through the axle and one plastic puck on each side.

 

R&G Axle Sliders front Ducati Multistrada 1200 Monster 1200 Monster 1200S Monster 821

R&G Axle Sliders (front), Ducati Multistrada 1200, Monster 1200, Monster 1200S, Monster 821

R&G Axle Sliders (front), Ducati Multistrada 1200, Monster 1200, Monster 1200S, Monster 821 - No cut or plastic fairings modification required. Material = uhmw-pe (ultra high molecular weight polyethylene). Slider dimensions = approx 15 ” in overall length, 175″ in diameter. Fit models 2000 to 2015 suzuki dr-z 400s dr-z 400e dr-z 400sm. Condition = new.

 

T-Rex Racing 2013 - 2017 Yamaha FZ-09  MT-09  FJ-09 Rear Axle Sliders

T-Rex Racing 2013 – 2017 Yamaha FZ-09 / MT-09 / FJ-09 Rear Axle Sliders

T-Rex Racing 2013 – 2017 Yamaha FZ-09 / MT-09 / FJ-09 Rear Axle Sliders - They provide indispensable protection for your beautiful expensive swing-arm. The installation is a simple bolt on with the bar going through the axle and one plastic puck on each side. However, due to constant improvement, the frame sliders can sometimes vary slightly from those in the picture. The slider pucks are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications. Rest assured that you are getting the best material commercially available. The frame sliders that you will receive will most likely be the ones pictured above. The long bar and inserts inside the sliders are made 6061-t6 aluminum for strength. This purchase is for a pair of rear axle sliders for above bike models.

 

SPEEDYMOTO Rear Axle Sliders 748-998 M110 MH900 S2R S4R HM Multi 848 10-0203

SPEEDYMOTO Rear Axle Sliders: 748-998, M110, MH900, S2R, S4R, HM, Multi, 848 10-0203

SPEEDYMOTO Rear Axle Sliders: 748-998, M110, MH900, S2R, S4R, HM, Multi, 848 10-0203 - ◾Easy installation, only takes minutes. ◾designed to work with a standard rear stand for easy servicing. Speedymoto rear axle sliders provides the best protection for your single sided swing arm ducati. ◾Speedymoto sliders are made from superior and more expensive hdpe plastic, which slides and absorbs impacts better than any other product on the market.

 

R&G Axle Sliders front 748749916996998999RSVTuonoMster 00-MTSHYMShiverDorsoduro7501200Caponord 1200 848 Streetfighter

R&G Axle Sliders (front), 748/749/916/996/998/999/RSV/Tuono/M’ster 00-/MTS/HYM/Shiver/Dorsoduro750/1200/Caponord 1200/ 848 Streetfighter

R&G Axle Sliders (front), 748/749/916/996/998/999/RSV/Tuono/M’ster 00-/MTS/HYM/Shiver/Dorsoduro750/1200/Caponord 1200/ 848 Streetfighter - Each slider is made of the same proprietary plastics blend as shogun frame sliders each uv resistant puck is shaped to accommodate a spool lift stand, in addition to other types of stands several shogun axle slider kits like honda, kawasaki, suzuki and yamaha units come with a cnc machined stainless steel axle nut some other manufacturers of axle sliders do not let the rider know that there is a lot of unnecessary effort involved in the installation of their kits. Shogun axle sliders the makers of shogun frame sliders up the ante with shogun axle sliders shogun axle sliders are manufactured to the same precision and quality control standards as shogun frame sliders axle sliders help protect expensive suspension components in the event of a crash and may significantly reduce the cost of repair. Designed to help eliminate damage during a drop. Made in the usa.

 

waase 2 PCS Front Rear Wheel Fork Axle Sliders Cap Crash Protector For Yamaha MT-07 FZ-07 MT07 FZ07 2014 2015 2016 Black

waase 2 PCS Front & Rear Wheel Fork Axle Sliders Cap Crash Protector For Yamaha MT-07 FZ-07 MT07 FZ07 2014 2015 2016 (Black)

waase 2 PCS Front & Rear Wheel Fork Axle Sliders Cap Crash Protector For Yamaha MT-07 FZ-07 MT07 FZ07 2014 2015 2016 (Black) - Installation instructions not included. Fitment for yamaha mt-07 / fz-07 2014-2016 condition brand new aftermarket item,never used or installed. Quantity one pair (2pcs) material high quality aluminum alloy,cnc machind. Color as the picture shown.

 

R&G Axle Sliders front YZFWR 250 thru 450 NOT WR450F 13-  GasGas 125 250 450

R&G Axle Sliders (front), YZ(F)/WR 250 thru 450 (NOT WR450F ’13- ) & GasGas 125, 250, 450

R&G Axle Sliders (front), YZ(F)/WR 250 thru 450 (NOT WR450F ’13- ) & GasGas 125, 250, 450 - Fork axle sliders. No cut or plastic fairings modification required. Fit models = 2015-2017 suzuki gsxr 750 gsxr 600. Materials = uhmw-pe (ultra high molecular weight polyethylene) the brackets are made of aircraft grade aluminum 6061-t6.

 

T-Rex 2010 - 2017 Kawasaki Ninja 1000  Z1000 Front Axle Sliders

T-Rex 2010 – 2017 Kawasaki Ninja 1000 / Z1000 Front Axle Sliders

T-Rex 2010 – 2017 Kawasaki Ninja 1000 / Z1000 Front Axle Sliders - The slider pucks are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. Rest assured that you are getting the best material commercially available. This purchase is for a set of front axle sliders for above bike models. They are designed to minimize damage to the front forks in a low-side. The frame sliders that you will receive will most likely be the ones pictured above. The and inserts inside the sliders are made 6061-t6 aluminum for strength. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications. However, due to constant improvement, the frame sliders can sometimes vary slightly from those in the picture.

 

2008-2018 Suzuki GSX1300R Front Axle Sliders - 702-5229 - MADE IN THE USA

2008-2018 Suzuki GSX1300R Front Axle Sliders – 702-5229 – MADE IN THE USA

2008-2018 Suzuki GSX1300R Front Axle Sliders – 702-5229 – MADE IN THE USA - Made in the usa. Shogun axle sliders the makers of shogun frame sliders up the ante with shogun axle sliders shogun axle sliders are manufactured to the same precision and quality control standards as shogun frame sliders axle sliders help protect expensive suspension components in the event of a crash and may significantly reduce the cost of repair. Each slider is made of the same proprietary plastics blend as shogun frame sliders each uv resistant puck is shaped to accommodate a spool lift stand, in addition to other types of stands several shogun axle slider kits like honda, kawasaki, suzuki and yamaha units come with a cnc machined stainless steel axle nut some other manufacturers of axle sliders do not let the rider know that there is a lot of unnecessary effort involved in the installation of their kits. No need to drill through your stock axle nut, shogun provides one for you that is the same grade or better than oem rod component is machined, not an all-thread piece a machined rod has fewer stress risers than all thread and therefore greater structural integrity during a crash well written instructions with color photos make installing each unit fast and easy, with minimal modification necessary to your motorcycle.

 

T-Rex Racing All Years Ducati 848  1098  1198 R  S  SP No Cut Frame Front Rear Axle Sliders

T-Rex Racing All Years Ducati 848 / 1098 / 1198 R / S / SP No Cut Frame Front & Rear Axle Sliders

T-Rex Racing All Years Ducati 848 / 1098 / 1198 R / S / SP No Cut Frame Front & Rear Axle Sliders - Material = uhmw-pe (ultra high molecular weight polyethylene) the brackets are made of steel. Fit models = all years ducati 848 / 1098 / 1198 r / s / sp. No cut or plastic fairings modification required. Slider dimensions = approx 25″ and 35″ in length and 2″ in diameter for the frame sliders,15″ in overall length, 175″ in diameter for the front axle sliders, 4″ in overall length, 2″ in diameter for the rear axle sliders.

 

NICECNC Blue Front Axle Slider for S-u-zuki GSX 1300 BK B-KING 2007-2014 GSX-R 1000 2009-2011

NICECNC Blue Front Axle Slider for S-u-zuki GSX 1300 BK (B-KING) 2007-2014 GSX-R 1000 2009-2011

NICECNC Blue Front Axle Slider for S-u-zuki GSX 1300 BK (B-KING) 2007-2014 GSX-R 1000 2009-2011 - These axle sliders are made from high quality aluminum to protect your motorcycle in case of an accidental lay-down. Package included1 x rear axle sliders,easy to install, no installation instruction. Condition100% brand new aftermarket parts,placement on vehiclefront. Material6061-t6 aluminum + pc / abs high-strength plastic alloy,high torsion and stress resistance crash pads. It can help protect expensive suspension components in the event of a crash and may significantly reduce the cost of repair.

 

T-Rex Racing 2015 - 2017 Suzuki GSX-R600  GSX-R750 No Cut Frame Front Axle Sliders Spools - RedLogoRedSpool

T-Rex Racing 2015 – 2017 Suzuki GSX-R600 / GSX-R750 No Cut Frame Front Axle Sliders Spools – RedLogo/RedSpool

T-Rex Racing 2015 – 2017 Suzuki GSX-R600 / GSX-R750 No Cut Frame Front Axle Sliders Spools – RedLogo/RedSpool - Fit models = 2015-2017 suzuki gsxr 750 gsxr 600. No cut or plastic fairings modification required. Special features = the pucks are solid and not hollow, made to withstand a greater impact the brackets are designed not to rotate in a low side and braced together to increase strength. Materials = uhmw-pe (ultra high molecular weight polyethylene) the brackets are made of aircraft grade aluminum 6061-t6.

 

KTM Axle Sliders Rear RC390390 Duke 90110945000

KTM Axle Sliders Rear RC390/390 Duke 90110945000

KTM Axle Sliders Rear RC390/390 Duke 90110945000 - Ktm axle sliders rear rc390/390 duke. Cannot be used in combination with powerparts silencer 90805999000. Protects the swingarm in the event of a minor crash.

 

T-Rex Racing 2013 - 2017 Yamaha FZ-09  MT-09  FJ-09 Front Axle Sliders

T-Rex Racing 2013 – 2017 Yamaha FZ-09 / MT-09 / FJ-09 Front Axle Sliders

T-Rex Racing 2013 – 2017 Yamaha FZ-09 / MT-09 / FJ-09 Front Axle Sliders - The frame sliders that you will receive will most likely be the ones pictured above. 9(177,000 psi in tensile strength). The sliders are made of uhmw-pe (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. The bolts are made of highest grade commercially available 12. However, due to constant improvement, the frame sliders can sometimes vary slightly from those in the picture. Rest assured that you are getting the best material commercially available. The installation is a simple bolt on with the bar going through the axle and one plastic puck on each side. That helps to protect your bikes front fork in case of a low-side. This purchase is for a pair of front axle / fork sliders for above bike models. It allows the fork to slide on the plastic puck instead of the fork itself. It is more dimensionally stable than nylon and used in many industrial ball bearing and friction reducing applications. The long bar is made of billet aluminum.