Best and Coolest 50 Milwaukee Twins

 

Milwaukee Twins Maintenance Free Battery

Milwaukee Twins Maintenance Free Battery

Milwaukee Twins Maintenance Free Battery - Fully sealed, high-output battery. No maintenance, vibration resistant, no corrosion. 1-year warranty. High cranking amps.

 

Milwaukee Twins Front Sintered Brake Pads

Milwaukee Twins Front Sintered Brake Pads

Milwaukee Twins Front Sintered Brake Pads - Up to 20% less rotor wear than competitive sintered compounds. Full metal compound that is the future standard for the next generation of motorcycle braking. Suitable for stainless steel rotors. Copper coated back plate. Highest coefficient of brake torque in an aftermarket road compound.

 

Milwaukee Twins Inner Tube 510-16

Milwaukee Twins Inner Tube 5.10-16

Milwaukee Twins Inner Tube 5.10-16 - This tube fits all 500/510 through 550/600-16 tires. Butyl rubber for good air retention, carefully molded for uniformity, and precision quality to provide for the finest service, long wear and security. Dependable inner tubes available in sizes to fit most models. Metal side valve stem.

 

Milwaukee Twins Chrome and Black Skull Derby Cover

Milwaukee Twins Chrome and Black Skull Derby Cover

Milwaukee Twins Chrome and Black Skull Derby Cover - The flat gasket is not included, we recommend part number 602-114 as this derby cover will not work with the stock o-ring. Matching milwaukee twins gas caps 7500272 or 7500273 and points covers 7500268 are also available. All new t27 hardware is included with locktite pre applied for your convenience. This chrome and black skull derby cover has a high quality finish and is built to last with it’s die-cast construction. Add some style to your ride with this easy to install upgrade from milwaukee twins.

 

Milwaukee Twins LED Star Turn Signal

Milwaukee Twins LED Star Turn Signal

Milwaukee Twins LED Star Turn Signal - 12-volt high-power leds are extremely bright and voltage efficient. In order for these lights to function as turn signals, you will need a load equalizer 340-300 or similar. E-mark approved. Beautiful flat black painted and chrome ring led turn signal with star pattern amber led panel. Includes 8mm stud and nut to fit any 5/16″ application.

 

Milwaukee Twins Chrome 9-12 Pullback Riser Set

Milwaukee Twins Chrome 9-1/2″, Pullback Riser Set

Milwaukee Twins Chrome 9-1/2″, Pullback Riser Set - Black smooth 503-245, black finned 503-243, chrome smooth 5000380, chrome finned 163-350. Mount holes are 1/2″-13. 1-1/2″ of pullback. Large 1-1/4″ shafts accept any chubby or stock style handlebars. Massive risers will get your bars way up high.

 

Milwaukee Twins Chrome and Black Skull Points Cover

Milwaukee Twins Chrome and Black Skull Points Cover

Milwaukee Twins Chrome and Black Skull Points Cover - Matching milwaukee twins gas caps 7500272 or 7500273 and derby covers 7500267 are also available. Add some style to your ride with this easy to install upgrade from milwaukee twins. All new hardware is included. This chrome and black skull points cover has a high quality finish and is built to last with it’s die-cast construction.

 

Milwaukee Twins Black Forged Aluminum 4-12 Pullback Risers for 1 Bars

Milwaukee Twins Black Forged Aluminum 4-1/2″, Pullback Risers for 1″, Bars

Milwaukee Twins Black Forged Aluminum 4-1/2″, Pullback Risers for 1″, Bars - Constructed from forged aluminum. Risers have 1/2″-13 threads and will require the use of riser bolt kit 5000885 or equivalent. Milwaukee twins’ pullback riser sets for 1″ handlebars have a unique old school look that fit most custom or stock applications. Will fit applications with 3-1/2 riser centers and single piece top clamps.

 

Milwaukee Twins Chrome Skull Horn Cover

Milwaukee Twins Chrome Skull Horn Cover

Milwaukee Twins Chrome Skull Horn Cover - These covers replace all side-mount cowbell type horn covers from 1991-2015 and are only available from milwaukee twins. Add some bite to your ride with this milwaukee twins skull horn cover. Forged from high grade aluminum. Chrome finish. Mounting hardware is included.

 

Milwaukee Twins Motorcycle Cover

Milwaukee Twins Motorcycle Cover

Milwaukee Twins Motorcycle Cover - Indoor and outdoor protection water-resistant nylon reinforced grommets on the bottom for cable lock or bungee cords elastic band on bottom for snug fit two vents includes black carrying bagwe always recommend that you allow your bike to cool before using a cover unless specifically noted otherwise by cover manufacturer.

 

Milwaukee Twins LED Black Mini Bullet Light Sets

Milwaukee Twins LED Black Mini Bullet Light Sets

Milwaukee Twins LED Black Mini Bullet Light Sets - Single lighting circuits. Mini bullet lights will add style and function to your bike. Led lights are super bright and will make you more noticeable. All have 2″ stems with nut fits any 5/16″ application. In order for these lights to function as turn signals, you will need a load equalizer 340-300 or similar.

 

Milwaukee Twins 12 Throttle by Wire Extension Kit

Milwaukee Twins 12″, Throttle by Wire Extension Kit

Milwaukee Twins 12″, Throttle by Wire Extension Kit - Wires match factory color codesnote throttle harness only corresponding handlebar harness sold separately. All the items needed to extend a set of oem handlebar switch wires. Includes both male and female terminals crimped on each end, and heat shrink.

 

Milwaukee Twins LED Running LightBrake Light Assembly

Milwaukee Twins LED Running Light/Brake Light Assembly

Milwaukee Twins LED Running Light/Brake Light Assembly - Includes light, wire harness adapter and reflectornote not for use with center mount license plate mounts. Assembly fits neatly under the rear edge of oem chopped rear fenders. Dual function design. Also available in red lens (712-760).

 

Milwaukee Twins Standard Bore EVO Complete Engine Gasket Kits

Milwaukee Twins Standard Bore EVO Complete Engine Gasket Kits

Milwaukee Twins Standard Bore EVO Complete Engine Gasket Kits - These kits contain head gaskets using htx-900 technology. Kit is custom packaged with each engine component bagged separately and illustrated with oem# for easy identification. Base gaskets, rocker gaskets and all the components needed to completely rebuild your engine. The highest quality sealing technology of gaskets.

 

Milwaukee Twins 18 Throttle by Wire Extension Kit

Milwaukee Twins 18″, Throttle by Wire Extension Kit

Milwaukee Twins 18″, Throttle by Wire Extension Kit - Wires match factory color codesnote throttle harness only corresponding handlebar harness sold separately. All the items needed to extend a set of oem handlebar switch wires. Includes both male and female terminals crimped on each end, and heat shrink.

 

Milwaukee Twins Front Organic Brake Pads

Milwaukee Twins Front Organic Brake Pads

Milwaukee Twins Front Organic Brake Pads - Performs well in both wet and dry conditions. Suitable for both stainless steel and cast iron rotors. Manufactured with the oe homologated process. Featuring an organic compound for high performance road use originally developed to withstand the rigors of world-class racing. Alloy coated back plate for reduced corrosion.

 

Milwaukee Twins 12 Handlebar Wiring Extension Kit

Milwaukee Twins 12″, Handlebar Wiring Extension Kit

Milwaukee Twins 12″, Handlebar Wiring Extension Kit - All the items needed to extend a set of oem handlebar switch wires. Wires match factory color codes. Includes both male and female terminals crimped on each end, and heat shrink.

 

Milwaukee Twins Motorcycle Cover

Milwaukee Twins Motorcycle Cover

Milwaukee Twins Motorcycle Cover - Indoor and outdoor protection water-resistant nylon reinforced grommets on the bottom for cable lock or bungee cords elastic band on bottom for snug fit two vents includes black carrying bagwe always recommend that you allow your bike to cool before using a cover unless specifically noted otherwise by cover manufacturer.

 

Milwaukee Twins Inner Tube 325350-19

Milwaukee Twins Inner Tube 3.25/3.50-19

Milwaukee Twins Inner Tube 3.25/3.50-19 - 50-19 tires long wear and security rubber center valve stem. 25/3. Dependable inner tubes available in sizes to fit most models rubber for good air retention carefully molded for uniformity precision quality to provide for the finest service fits 3.

 

Milwaukee Twins Rear Organic Brake Pads

Milwaukee Twins Rear Organic Brake Pads

Milwaukee Twins Rear Organic Brake Pads - Featuring an organic compound for high performance road use originally developed to withstand the rigors of world-class racing. Alloy coated back plate for reduced corrosion. Performs well in both wet and dry conditions. Suitable for both stainless steel and cast iron rotors. Manufactured with the oe homologated process.

 

Milwaukee Twins FrontRear Organic Brake Pads

Milwaukee Twins Front/Rear Organic Brake Pads

Milwaukee Twins Front/Rear Organic Brake Pads - Alloy coated back plate for reduced corrosion. Performs well in both wet and dry conditions. Manufactured with the oe homologated process. Suitable for both stainless steel and cast iron rotors. Featuring an organic compound for high performance road use originally developed to withstand the rigors of world-class racing.

 

Milwaukee Twins LED Star Turn Signals

Milwaukee Twins LED Star Turn Signals

Milwaukee Twins LED Star Turn Signals - Includes 8mm stud and nut to fit any 5/16″ application. In order for these lights to function as turn signals, you will need a load equalizer 340-300 or similar. Beautiful flat black painted led turn signal with a star pattern amber led panel. E-mark approved. 12-volt high-power leds are extremely bright and voltage efficient.

 

Milwaukee Twins Rear Organic Brake Pads

Milwaukee Twins Rear Organic Brake Pads

Milwaukee Twins Rear Organic Brake Pads - Alloy coated back plate for reduced corrosion. Suitable for both stainless steel and cast iron rotors. Featuring an organic compound for high performance road use originally developed to withstand the rigors of world-class racing. Manufactured with the oe homologated process. Performs will in both wet and dry conditions.

 

Milwaukee Twins Black Streamliner Passenger Floorboards

Milwaukee Twins Black Streamliner Passenger Floorboards

Milwaukee Twins Black Streamliner Passenger Floorboards - These boards have a black base. Black floorboard mounts also available separately 211-179 without floorboards. This kit comes with chrome mounts for 1993-2013 touring models (except trikes). A matching brake pedal is also available separately 211-181. These sleek and attractive floorboards are a great alternative to replace those boring stock boards.

 

Milwaukee Twins T-II Black Grips

Milwaukee Twins T-II Black Grips

Milwaukee Twins T-II Black Grips - Feature non-slip hard wearing rubber surface for fail safe operation. 1″ diameter. Machined from 6061-t6 aluminum.

 

Milwaukee Twins T-II Chrome Grips

Milwaukee Twins T-II Chrome Grips

Milwaukee Twins T-II Chrome Grips - Feature non-slip hard wearing rubber surface for fail safe operation. Machined from 6061-t6 aluminum. 1″ diameter.

 

Milwaukee Twins Black Passenger Streamliner Floorboard Mounts

Milwaukee Twins Black Passenger Streamliner Floorboard Mounts

Milwaukee Twins Black Passenger Streamliner Floorboard Mounts - Hardware included. These sleek and attractive mounts are a great alternative to replace those boring stock mounts. A matching brake pedal is also available separately 211-181.

 

Milwaukee Twins Black Forged Aluminum 6-12 Pullback Risers for 1 Bars

Milwaukee Twins Black Forged Aluminum 6-1/2″, Pullback Risers for 1″, Bars

Milwaukee Twins Black Forged Aluminum 6-1/2″, Pullback Risers for 1″, Bars - Milwaukee twins’ pullback riser sets for 1″ handlebars have a unique old school look that fit most custom or stock applications. Will fit applications with 3-1/2 riser centers and single piece top clamps. Constructed from forged aluminum. Risers have 1/2″-13 threads and will require the use of riser bolt kit 5000885 or equivalent.

 

Milwaukee Twins 15 Handlebar Wiring Extension Kit

Milwaukee Twins 15″, Handlebar Wiring Extension Kit

Milwaukee Twins 15″, Handlebar Wiring Extension Kit - Includes both male and female terminals crimped on each end, and heat shrink. All the items needed to extend a set of oem handlebar switch wires. Wires match factory color codes.

 

Milwaukee Twins Front or Rear Sintered Brake Pads 44082-00

Milwaukee Twins Front or Rear Sintered Brake Pads 44082-00

Milwaukee Twins Front or Rear Sintered Brake Pads 44082-00 - Up to 20% less rotor wear than competitive sintered compounds. Copper coated back plate. Suitable for stainless steel rotors. Highest coefficient of brake torque in an aftermarket road compound. Full metal compound that is the future standard for the next generation of motorcycle braking.

 

Milwaukee Twins Black Forged Aluminum 3-12 Straight Risers for 1 Bars

Milwaukee Twins Black Forged Aluminum 3-1/2″, Straight Risers for 1″, Bars

Milwaukee Twins Black Forged Aluminum 3-1/2″, Straight Risers for 1″, Bars - Milwaukee twins’ straight riser sets for 1″ handlebars have a unique old school look that fit most custom or stock applications. Constructed from forged aluminum. Will also fit applications with 3-1/2 riser centers and single piece top clamps. Risers have 1/2″-13 threads and will require the use of riser bolt kit 5000885 or equivalent.

 

Milwaukee Twins Black Forged Aluminum 5-12 Pullback Risers for 1 Bars

Milwaukee Twins Black Forged Aluminum 5-1/2″, Pullback Risers for 1″, Bars

Milwaukee Twins Black Forged Aluminum 5-1/2″, Pullback Risers for 1″, Bars - Will fit applications with 3-1/2 riser centers and single piece top clamps. Constructed from forged aluminum. Risers have 1/2″-13 threads and will require the use of riser bolt kit 5000885 or equivalent. Milwaukee twins’ pullback riser sets for 1″ handlebars have a unique old school look that fit most custom or stock applications.

 

Milwaukee Twins 1-14 Polished 10 Touring Handlebar

Milwaukee Twins 1-1/4″ Polished 10″ Touring Handlebar

Milwaukee Twins 1-1/4″ Polished 10″ Touring Handlebar - Stainless steel construction notched for tbw and dimpled for external wiring work with 1″ diameter controls and grips all handlebars have cnc mandrel bends handlebars are knurled, with laser cut slots for internal wiring hand polished to a mirror finish, looks like chrome with the durability of stainless.

 

Milwaukee Twins 18 Throttle by Wire Extension Kit

Milwaukee Twins 18″, Throttle by Wire Extension Kit

Milwaukee Twins 18″, Throttle by Wire Extension Kit - All the items needed to extend a set of oem handlebar switch wires. Wires match factory color codesnote throttle harness only corresponding handlebar harness sold separately. Includes both male and female terminals crimped on each end, and heat shrink.

 

Milwaukee Twins Magnetic Oil Filter with Hex Top Nut

Milwaukee Twins Magnetic Oil Filter with Hex Top Nut

Milwaukee Twins Magnetic Oil Filter with Hex Top Nut - One piece can with fully rolled and safety crimped edges. Filter also provides more paper folds than standard filters, resulting in 30% more filtration area. Magnetic ring tower in the center of the filter to remove any particles less than 10 microns that may have passed through the filter element. Features a built in, correctly calibrated pressure relief valve.

 

Milwaukee Twins Black Forged Aluminum 4-12 Straight Risers for 1 Bars

Milwaukee Twins Black Forged Aluminum 4-1/2″, Straight Risers for 1″, Bars

Milwaukee Twins Black Forged Aluminum 4-1/2″, Straight Risers for 1″, Bars - Risers have 1/2″-13 threads and will require the use of riser bolt kit 5000885 or equivalent. Constructed from forged aluminum. Milwaukee twins’ straight riser sets for 1″ handlebars have a unique old school look that fit most custom or stock applications. Will also fit applications with 3-1/2 riser centers and single piece top clamps.

 

Milwaukee Twins 1-14 Black 10 Touring Handlebar

Milwaukee Twins 1-1/4″ Black 10″ Touring Handlebar

Milwaukee Twins 1-1/4″ Black 10″ Touring Handlebar - Stainless steel construction notched for tbw and dimpled for external wiring work with 1″ diameter controls and grips all handlebars have cnc mandrel bends handlebars are knurled, with laser cut slots for internal wiring hand polished and powder coated for a beautiful finish.

 

Milwaukee Twins 3-58 Complete Engine Gasket kits

Milwaukee Twins 3-5/8″ Complete Engine Gasket kits

Milwaukee Twins 3-5/8″ Complete Engine Gasket kits - These kits contain head gaskets using htx-900 technology. Kit is custom packaged with each engine component bagged separately and illustrated with oem# for easy identification. Base gaskets, rocker gaskets and all the components needed to completely rebuild your engine. The highest quality sealing technology of gaskets.

 

Milwaukee Twins LED Star Turn Signals

Milwaukee Twins LED Star Turn Signals

Milwaukee Twins LED Star Turn Signals - E-mark approved. Includes 8mm stud and nut to fit any 5/16″ application. Beautiful chromed led turn signal with star pattern amber led panel. In order for these lights to function as turn signals, you will need a load equalizer 340-300 or similar. 12-volt high-power leds are extremely bright and voltage efficient.

 

Milwaukee Twins Maintenance Free Battery

Milwaukee Twins Maintenance Free Battery

Milwaukee Twins Maintenance Free Battery - No maintenance, vibration resistant, no corrosion. 1-year warranty. High cranking amps. Fully sealed, high-output battery.

 

Milwaukee Twins Inner Tube 510-16

Milwaukee Twins Inner Tube 5.10-16

Milwaukee Twins Inner Tube 5.10-16 - This tube fits all 500/510 through 550/600-16 tires. Rubber for good air retention, carefully molded for uniformity, and precision quality to provide for the finest service, long wear and security. Metal center valve stem. Dependable inner tubes available in sizes to fit most models.

 

Milwaukee Twins Black Forged Aluminum 5-12 Straight Risers for 1 Bars

Milwaukee Twins Black Forged Aluminum 5-1/2″, Straight Risers for 1″, Bars

Milwaukee Twins Black Forged Aluminum 5-1/2″, Straight Risers for 1″, Bars - Constructed from forged aluminum. Will also fit applications with 3-1/2 riser centers and single piece top clamps. Risers have 1/2″-13 threads and will require the use of riser bolt kit 5000885 or equivalent. Milwaukee twins’ straight riser sets for 1″ handlebars have a unique old school look that fit most custom or stock applications.

 

Milwaukee Twins Rear Sintered Brake Pads

Milwaukee Twins Rear Sintered Brake Pads

Milwaukee Twins Rear Sintered Brake Pads - Full metal compound that is the future standard for the next generation of motorcycle braking. Copper coated back plate. Up to 20% less rotor wear than competitive sintered compounds. Highest coefficient of brake torque in an aftermarket road compound. Suitable for stainless steel rotors.

 

Milwaukee Twins Chrome and Black Hand Bone Mirror

Milwaukee Twins Chrome and Black Hand Bone Mirror

Milwaukee Twins Chrome and Black Hand Bone Mirror - The chrome and black hand bone mirror by milwaukee twins is also available in chrome with a black mirror head 7500087 , all black 7600403 and all chrome 7600402. Turn heads and get people talking with these eerie chrome and black hand bone mirrors by milwaukee twins. The milwaukee twins chrome and black hand bone mirror is sold in pairs, with all mounting hardware necessary for specific left and right side installation. The detailed black bone arm and hand are made of cast aluminum, and the chromed cast aluminum mirror head is set into the arm stem with a pivot joint in the wrist. Mirror is 5″ wide x3″ tall.

 

Milwaukee Twins Magnetic Oil Filter

Milwaukee Twins Magnetic Oil Filter

Milwaukee Twins Magnetic Oil Filter - One piece can with fully rolled and safety crimped edges. Each filter has a magnetic ring tower in the center of the filter to remove any particles less than 10 microns that may have passed through the filter element. Filter also provides more paper folds than standard filters, resulting in 30% more filtration area. Features a built in, correctly calibrated pressure relief valve.

 

Milwaukee Twins 8 Handlebar Wiring Extension Kit

Milwaukee Twins 8″, Handlebar Wiring Extension Kit

Milwaukee Twins 8″, Handlebar Wiring Extension Kit - Includes both male and female terminals crimped on each end, and heat shrink. All the items needed to extend a set of oem handlebar switch wires. Wires match factory color codes.

 

Milwaukee Twins 15 Handlebar Wiring Extension Kit

Milwaukee Twins 15″, Handlebar Wiring Extension Kit

Milwaukee Twins 15″, Handlebar Wiring Extension Kit - Includes both male and female terminals crimped on each end, and heat shrink. Wires match factory color codes. All the items needed to extend a set of oem handlebar switch wires.

 

Milwaukee Twins Black Forged Aluminum 6-12 Straight Risers for 1 Bars

Milwaukee Twins Black Forged Aluminum 6-1/2″, Straight Risers for 1″, Bars

Milwaukee Twins Black Forged Aluminum 6-1/2″, Straight Risers for 1″, Bars - Risers have 1/2″-13 threads and will require the use of riser bolt kit 5000885 or equivalent. Milwaukee twins’ straight riser sets for 1″ handlebars have a unique old school look that fit most custom or stock applications. Will also fit applications with 3-1/2 riser centers and single piece top clamps. Constructed from forged aluminum.

 

Milwaukee Twins Black Skull Horn Cover

Milwaukee Twins Black Skull Horn Cover

Milwaukee Twins Black Skull Horn Cover - Powder coated finish. Add some bite to your ride with this milwaukee twins skull horn cover. Forged from high grade aluminum. These covers replace all side-mount cowbell type horn covers from 1991-2015 and are only available from milwaukee twins. Mounting hardware is included.

 

Milwaukee Twins Maintenance Free Battery

Milwaukee Twins Maintenance Free Battery

Milwaukee Twins Maintenance Free Battery - High cranking amps. Fully sealed, high-output battery. 1-year warranty. No maintenance, vibration resistant, no corrosion.